fredericplante/rogue-code

Issues

• Tone library error on Arduino 1.5.4 (Win 8)

  #14 opened 9 years ago by GoogleCodeExporter
  5

• Attiny85 SoftPWM

  #15 opened 9 years ago by GoogleCodeExporter
  0

• SoftPWM support for ATtiny2313 - Solution included

  #16 opened 9 years ago by GoogleCodeExporter
  0

• Disable SoftPWM again

  #17 opened 9 years ago by GoogleCodeExporter
  0

• This project is abandoned, isn't?

  #18 opened 9 years ago by GoogleCodeExporter
  0

• Tone Library fails to comply for the Leonardo

  #13 opened 9 years ago by GoogleCodeExporter
  9

• Hard PWM pin 9 does not work properly after SoftPWMBegin has been called

  #12 opened 9 years ago by GoogleCodeExporter
  1

• Does not compile on Arduino 0022

  #9 opened 9 years ago by GoogleCodeExporter
  0

• RogueMP3 Arduino library with Arduino 1.0

  #10 opened 9 years ago by GoogleCodeExporter
  1

• Not working with Arduino 1.0.1

  #11 opened 9 years ago by GoogleCodeExporter
  2

• Enhancement: Synchronize tone with external signal

  #5 opened 9 years ago by GoogleCodeExporter
  0

• Update for Arduino 1.0

  #6 opened 9 years ago by GoogleCodeExporter
  1

• Problem when using a Servo LIbrary

  #7 opened 9 years ago by GoogleCodeExporter
  1

• SoftPWM: Pin number 0 not being accessed correctly

  #8 opened 9 years ago by GoogleCodeExporter
  1

• Temporary settings not loading from config file. PC O, PC V, PC B

  #2 opened 9 years ago by GoogleCodeExporter
  1

• 7 bit trigger automatically repeats if held low

  #3 opened 9 years ago by GoogleCodeExporter
  1

• ummc.sync has no timeout - Arduino RogueSD library

  #4 opened 9 years ago by GoogleCodeExporter
  1

• SoftPWM unable to sync with scanning on multiplexed displays

  #1 opened 9 years ago by GoogleCodeExporter
  1