freifunk-gluon/gluon
a modular framework for creating OpenWrt-based firmwares for wireless mesh nodes
LuaNOASSERTION
Issues
- 0
ZTE MF289F doesn't finish rebooting sometimes
#3349 opened by Djfe - 4
- 4
batman-adv: Multicast eventually not forwarded from/to clients on supernodes on v2023.x?
#3059 opened by maurerle - 6
- 0
autoupdater and mesh-vpn status in gluon-info
#3337 opened by maurerle - 0
missing documentation for packages
#3131 opened by maurerle - 1
Mesh on wan on vlan
#3330 opened by albialbi - 1
device not leaving config mode: Too few erase blocks
#3319 opened by Djfe - 0
- 8
- 1
node monitoring: report errors through respondd
#3320 opened by Djfe - 0
OM2P fails to boot (Upgrade v2021.1 > v2023.1)
#3253 opened by Djfe - 3
- 7
Proposal: Rename development branch from master to main
#3280 opened by neocturne - 13
- 2
- 4
- 2
- 2
fix issue that causes dnsmasq log spam
#3262 opened by Djfe - 5
Ubiquiti ERX config mode not indicated by LEDs
#3263 opened by Djfe - 6
v2023.2.x: ramips-mt7620: archer-c20i: config lost
#3268 opened by maurerle - 2
python3-distutils support ends that is a requirement for gluon Build (since Python 3.12)
#3266 opened by ChristianMiddendorf - 0
mt7621: support TP-Link Archer AX23 / AX1800
#3257 opened by rotanid - 1
Netgear WAX220 100mbit/s ethernet no link up
#3174 opened by Djfe - 1
Xiaomi Mi Router 4A (100M International Edition) is now available in Version 2 that is not supported (device_name = R4ACV2)
#3183 opened by ChristianMiddendorf - 0
- 1
explain site.conf signature pubkeys in docs
#3247 opened by ruzko - 8
v2023.2: Status page broken, no IP shown on map
#3246 opened by citronalco - 10
VLAN configuration >= v2022.1.4
#3234 opened by 4ndr3 - 0
Invalid or missing image-customization.lua is ignored
#3218 opened by neocturne - 5
- 1
- 0
- 4
container permission issue
#3199 opened by ruzko - 1
barely reachable node when using WAN-Uplink and LAN-Mesh on the same L2 network
#3147 opened by rotanid - 0
802.11s mesh is using 802.11b basic rates
#3185 opened by blocktrron - 1
Privilege reduction for WAN dnsmasq
#3175 opened by neocturne - 2
v2023.x: FUTRO running with x86-generic image does not run wgpeerselector after some boots
#3173 opened by maurerle - 0
autoupdater: warning: execution of /usr/lib/autoupdater/upgrade.d/10stop-network exited with status code 2
#3171 opened by herbetom - 6
5GHz outdoor operation 40MHz - acs error
#3165 opened by Djfe - 1
v2023.2: FritzBox 4040: Kernel Warning in airtime_link_metric_get spamming log
#3160 opened by SmithChart - 18
only link-local ipv6 address available on gluon node
#3130 opened by maurerle - 2
- 2
x86: Using an x86 image, not all the interfaces are picked up & cannot be set in UI
#3129 opened by maurerle - 1
- 2
- 0
- 1
- 1
readthedocs latest version information outdated
#3028 opened by maurerle - 3
[v2023.1.1] Tunneldigger causes high CPU Load when enabled but no WAN connection available
#3024 opened by dariks