ESPixelStick Firmware

This is the Arduino firmware for the ESP8266 based ESPixelStick. The ESPixelStick is a small wireless E1.31 sACN pixel controller designed to control a single strand of pixels. Pixel limitations are mostly based upon your desired refresh rate, around 680 pixels (4 universes) for a 25ms E1.31 source rate. MQTT support is provided as well for integration into home automation systems where an E1.31 source may not be present.

Since this project began, the firmware has moved beyond just pixel support for those with other ESP8266 based devices. The ESPixelStick firmware now supports outputting E1.31 streams to serial links as well. Note this is not supported on the ESPixelStick hardware, but intended for other ESP8266 devices such as Bill's RenardESP.

Hardware

Being open source, you are free to use the ESPixelStick firmware on the device of your choice. The code however is written specifically for the ESPixelStick. The ESPixelStick V2 utilizes an ESP-01 module and provides high current connectors, fusing, power filtering, a programming interface and proper logic level buffering. If you're in the US and would like to purchase an ESPixelStick, they are available via Amazon. The proceeds go towards things like keeping my wife happy so I can work on this project :)

Requirements

Along with the Arduino IDE, you'll need the following software to build this project:

Adruino for ESP8266 - Arduino core for ESP8266 - 2.40-rc1 or greater required
Arduino ESP8266 Filesystem Uploader - Arduino plugin for uploading files to SPIFFS
gulp - Build system required to process web sources. Refer to the html README for more information.

The following libraries are required:

ArduinoJson - Arduino JSON Library
ESPAsyncE131 - Asynchronous E1.31 (sACN) library
ESPAsyncTCP - Asynchronous TCP Library
ESPAsyncUDP - Asynchronous UDP Library
ESPAsyncWebServer - Asynchronous Web Server Library
async-mqtt-client - Asynchronous MQTT Client

Important Notes on Compiling and Flashing

Device mode is now a compile time option to set your device type and is configured in the top of the main sketch file. Current options are ESPS_MODE_PIXEL and ESPS_MODE_SERIAL. The default is ESPS_MODE_PIXEL for the ESPixelStick hardware.
Web pages must be processed, placed into data/www, and uploaded with the upload plugin. Gulp will process the pages and put them in data/www for you. Refer to the html README for more information.
In order to use the upload plugin, the ESP8266 must be placed into programming mode and the Arduino serial monitor must be closed.
ESP-01 modules must be configured for 1M flash and 128k SPIFFS within the Arduino IDE for OTA updates to work.
For best performance, set the CPU frequency to 160MHz (Tools->CPU Frequency). You may experience lag and other issues if running at 80MHz.

Supported Outputs

The ESPixelStick firmware can generate the following outputs from incoming E1.31 streams, however your hardware must support the physical interface.

Pixel Protocols

WS2811 / WS2812 / WS2812b
GE Color Effects

Serial Protocols

DMX512
Renard

MQTT Support

NOTE: Effects are planned, this is just the initial static support. Brightness is not implemented yet either.

MQTT can be configured via the web interface. When enabled, a payload of "ON" will tell the ESPixelStick to override any incoming E1.31 data with MQTT data. When a payload of "OFF" is received, E1.31 processing will resume. All Topics are under the configured top level Topic.

For example, if you enter porch/esps as the topic, the following topics will be generated:

porch/esps/light/status
porch/esps/light/switch
porch/esps/brightness/status
porch/esps/brightness/set
porch/esps/rgb/status
porch/esps/rgb/set

And here's a corresponding configuration for Home Assistant:

light:
  - platform: mqtt
    name: "Front Porch ESPixelStick"
    state_topic: "porch/esps/light/status"
    command_topic: "porch/esps/light/switch"
    brightness_state_topic: "porch/esps/brightness/status"
    brightness_command_topic: "porch/esps/brightness/set"
    rgb_state_topic: "porch/esps/rgb/status"
    rgb_command_topic: "porch/esps/rgb/set"
    brightness_scale: 100
    optimistic: false

Resources

Firmware: http://github.com/forkineye/ESPixelStick
Hardware: http://forkineye.com/ESPixelStick

Credits

The great people at http://diychristmas.org and http://doityourselfchristmas.com for inspiration and support.
Bill Porter for initial Renard and SoftAP aupport.
Bill Porter and Grayson Lough for initial DMX support.
Rich Danby for helping polish the front-end.

frodeaux/ESPixelStick