fsaris/EspHome-AwoX-BLE-mesh-hub

Issues

• Long username crashes esphome device

  #88 opened 2 months ago by radovanobal
  5

• Motion sensor

  #93 opened 2 months ago by mrsofa
  10

• EPanel_120 not detected

  #101 opened 3 months ago by benedikt-wueller
  4

• How to connect EGLO Giron-C?

  #99 opened 4 months ago by racinmat
  2

• update impossibe : platform key is required

  #95 opened 4 months ago by alka79
  1

• Disconnect with error ESP_GATTC_DISCONNECT_EVT

  #89 opened 4 months ago by Stefan3005
  3

• One lamp does not properly get set up

  #92 opened 4 months ago by chefexperte
  8

• ESPHome AwoX entity greyed out

  #91 opened 4 months ago by danieldur
  2

• Device authentication error: known mesh credentials are not excepted by the device

  #94 opened 5 months ago by RobinWeitzel
  2

• Error: The program size (2021481 bytes) is greater than maximum allowed (1835008 bytes)

  #63 opened a year ago by dabepp
  30

• Update ESPHome to 2024.2.0

  #74 opened 10 months ago by Dillton
  23

• Cannot OTA update due to insufficient flash memory

  #86 opened 8 months ago by danieldur
  2

• 2024.3.1 connection issues

  #83 opened 8 months ago by oxigen-dev
  56

• Groups cannot be controlled after some time

  #84 opened 9 months ago by michalpulda
  6

• exception while calling this->setup_connection() in mesh_connection.cpp

  #82 opened 9 months ago by echavet
  4

• Connection problems ESPHome 2024.2.*

  #79 opened 10 months ago by oxigen-dev
  11

• Currently 0 mesh devices reachable through active connections (0 currently known and 0 fully recognized)

  #75 opened 10 months ago by p-h-a-i-l
  2

• NO devices discovered

  #73 opened 10 months ago by Jinguba
  1

• Support for native API

  #59 opened a year ago by 3D-DIYde
  12

• Program size too big

  #69 opened 10 months ago by JbbDE
  1

• Awox service can have multiple credentials

  #28 opened 10 months ago by mrPjer
  4

• Install problem

  #64 opened 10 months ago by Kees48
  1

• Size to big?

  #65 opened 10 months ago by OkOtChA666
  1

• [Feature request] Color transition

  #57 opened a year ago by oxigen-dev
  9

• [Feature request] Time duration of transitions between color and effects

  #60 opened a year ago by oxigen-dev
  3

• Error: The program size is greater than maximum allowed

  #56 opened a year ago by mykalanui
  17

• ESP32 reboot

  #44 opened a year ago by caveman2003
  11

• [BUG] Single light triggers whole group

  #61 opened a year ago by Dillton
  9

• Logger: Compile Warnings and Errors

  #62 opened a year ago by mykalanui
  4

• Group support enhancement

  #58 opened a year ago by Dillton
  2

• [Feature request] MAC address whitelist

  #34 opened a year ago by oxigen-dev
  5

• [BUG] EGLO PLUG PLUS in unknown state

  #52 opened a year ago by Dillton
  1

• Update to ESPHome 2023.12.x results in duplicated discovery messages

  #50 opened a year ago by fsaris
  1

• MQTT doesn't find my devices...

  #48 opened a year ago by davidmcgh
  5

• Eglo Panel 10x120 is recognized as dimmable bulb

  #43 opened a year ago by Raphcmx
  5

• Can anyone explain me how to do the configuration?

  #45 opened a year ago by danielcolumbus
  1

• Eglo Fueva-Z devices not published on MQTT

  #33 opened a year ago by mtpaasto
  7

• Can't connect to lights/connect them to home assistant

  #35 opened a year ago by ogitmb
  4

• Adding EGLO/AwoX Connect-C Sensor

  #36 opened a year ago by AMDFreak2006
  0

• Any plans to control BLE mesh via official WiFi-BLE bridges?

  #37 opened a year ago by AMDFreak2006
  1

• ESP thinks it's connected to the mesh even though it is not

  #29 opened a year ago by michalpulda
  4

• Trying to connect to lights but fails the loops

  #26 opened a year ago by gallaid
  13

• Compiling of ESPHome fails with 3 errors

  #31 opened a year ago by dabepp
  8

• QUESTION: Eglo spot 170

  #30 opened a year ago by Dillton
  1

• Login without old integration

  #27 opened a year ago by NeonPimpZ
  2

• Light does not connect to mqtt

  #25 opened a year ago by superRandomGuy941
  1

• Light panel changes colour by itself after a while

  #22 opened a year ago by MarcelRichter-GitHub
  2

• [device_info] is an invalid option for [awox_mesh]. Please check the indentation.

  #20 opened a year ago by danieldur
  3

• Bug: MQTT entity name starts with the device name in your config - HA 2023.8

  #24 opened a year ago by Dillton
  2

• missing files

  #21 opened 2 years ago by superRandomGuy941
  0