A command-line control program for Elgato Key Lights running on your local network
It wasn't as difficult as I thought initially, however I want to give special thanks to the following resources:
Installation docs are on the way, but this will definitely make its way to the AUR.
Flags
Flag | Description |
---|---|
--ip 192.168.0.60 --ip 192.168.0.61 |
IP addresses of your lights |
--port 666 |
Port of the exposed IP addresses |
--value +20 OR --value _20 or --value 20 |
Value in which to set, increment or decrement by |
Commands
Command | Description |
---|---|
lightctl on |
Turns each light on. |
lightctl off |
Turns each light off. |
lightctl toggle |
Toggles each light to an on or off state. |
lightctl info |
Show some information from the accessory-info uri on the API. |
lightctl state |
Show some information from the light usi on the endpoint |
lightctl brightness --value x |
Set the value of brightness to a specific value such as 20 , _10 or +10 |
lightctl temperature --value x |
Set the value of temperature to a specific value such as 20 , _10 or +10 |
MIT - no obligations or warranties are provided with this application.