fusion-energy/cad_to_dagmc

Issues

• Adding option for mesh refinement

  #100 opened 5 months ago by jon-proximafusion
  0

• reducing mesh elements on a flat surface

  #37 opened 2 years ago by shimwell
  3

• faster meshing using all available cores

  #97 opened 5 months ago by shimwell
  0

• temp file should be brep not step

  #95 opened 5 months ago by shimwell
  0

• add CI using pip and building package sfrom source

  #58 opened 6 months ago by shimwell
  1

• Get CI working with just PIP installs

  #69 opened 6 months ago by shimwell
  1

• Problem with dagmc simulation

  #89 opened 9 months ago by gglamzn
  11

• check dagmc is enabled

  #78 opened a year ago by shimwell
  4

• Cannot convert .stp file to .h5m

  #88 opened 9 months ago by ctrossei
  4

• Compiling Fail cad_to_dagmc

  #87 opened a year ago by gglamzn
  5

• Loading of STEP file unsuccessful

  #82 opened a year ago by gglamzn
  4

• Include multi-thread meshing for gmsh to accelerate process

  #81 opened a year ago by rherrero-pf
  3

• Add ability to read in gmsh mesh file

  #53 opened a year ago by shimwell
  2

• AttributeError when using export_dagmc_h5m_file

  #73 opened a year ago by rlbarker
  9

• find openmc with dagmc compatible with cadquery master

  #51 opened a year ago by shimwell
  0

• Volume of Meshed object changed from CAD model

  #44 opened 2 years ago by Adambar24
  3

• Install using Conda and pip - pymoab is not included

  #55 opened a year ago by msavtchouk-pf
  3

• use cadquery to facet

  #28 opened 2 years ago by shimwell
  1

• cadquery imprint

  #38 opened a year ago by shimwell
  3

• Circular geometries turning square

  #25 opened 2 years ago by emaartensson
  3

• Don't have libGL with conda (in Docker)

  #19 opened 2 years ago by RemDelaporteMathurin
  4

• draft layout

  #1 opened 3 years ago by shimwell
  0