fventuri/gr-sdrplay3

Issues

• Building on headless pi5 / bookworm

  #33 opened 2 months ago by BobSelf22
  3

• Accessing agc->enable

  #34 opened 2 months ago by BobSelf22
  1

• tunerParams->ifType?

  #36 opened 2 months ago by BobSelf22
  1

• Adjusting LNAstate

  #40 opened 2 months ago by BobSelf22
  1

• ImportError: generic_type: type "rsp" referenced unknown base type "gr::sync_block"

  #49 opened 3 months ago by atmci
  3

• I have to initially connect then disconnect a SDRconnect client after a reboot on the target to allow the gnuradio graph to work for a RSPdx-R2.

  #48 opened 3 months ago by JoeTester1965
  37

• Query - support for dynamic frequency changing at runtime

  #45 opened 3 months ago by jcfitzpatrick12
  15

• Problems when using QT GUI Widgets to adjust RSP gains

  #43 opened 4 months ago by gozillah
  9

• Do these blocks support remote operation?

  #47 opened 3 months ago by JoeTester1965
  2

• 'gnuradio.sdrplay3' has no attribute 'rspdxr2'

  #46 opened 3 months ago by JoeTester1965
  6

• example rspdx.grc file: replace star characters in `rsp_selector` parameter with empty string

  #44 opened 4 months ago by Abdull
  2

• again problems using 2 RSPDuo

  #41 opened 4 months ago by Cornie8
  21

• No module named 'gnuradio.sdrplay3.sdrplay3_python'

  #42 opened 4 months ago by gozillah
  6

• Issue with mamba update and GNU Radio Companion

  #38 opened 6 months ago by l-smith
  1

• Cmake issue

  #37 opened 6 months ago by ghassel
  8

• ImportError: libgnuradio-sdrplay3.so.3.11.0git

  #35 opened 7 months ago by acadiane
  2

• Using two RSPduo at the same time, the raspberry pi 4b connection was unsuccessful

  #32 opened 7 months ago by djl2020-ddd
  3

• RSPDuo dual tuner independent rx - center_frequency in tuner 2 always identical to tuner 1

  #31 opened 7 months ago by jcfitzpatrick12
  15

• Multiple RSPduo devices not evenly weighted

  #27 opened a year ago by L-Coleman
  4

• 'gr-sdrplay3' module changes to defaults for AGC, DC offset correction, IQ imbalance correction

  #30 opened 8 months ago by fventuri
  1

• Output type

  #29 opened 9 months ago by iHD992
  4

• Timestamp with gr-sdrplay3

  #28 opened a year ago by ghassel
  1

• USE_LOWIF

  #26 opened a year ago by ahooper
  8

• sdrplay3 not properly compiled

  #25 opened 2 years ago by zywek123
  1

• Use of boost::format() in GR 3.10

  #24 opened 3 years ago by gvanem
  7

• Gain controls for LNA state

  #23 opened 3 years ago by fventuri
  10

• Problem building gr_sdrplay3

  #22 opened 3 years ago by sksail92
  3

• Actual RSPduo center frequency is different than commanded frequency

  #21 opened 3 years ago by flocentblack
  18

• RSPduo RF and IF gain

  #20 opened 3 years ago by flocentblack
  7

• Module sdrplay3 not found

  #17 opened 3 years ago by gom-4
  4

• Bulk/Isochronous transfer mode

  #19 opened 3 years ago by pabs77
  3

• Automatic Gain Control (AGC) not working properly

  #18 opened 3 years ago by kirat68
  1

• Output stdout to GRC message port

  #16 opened 3 years ago by kirat68
  2

• Bandwidth setting AUTO does not "set the bandwidth to the largest value below the sample rate"

  #15 opened 3 years ago by kirat68
  5

• Deadlock when staring sdrplay3 and sdrplay_api_server in state "ApiVersion Error: sdrplay_api_ServiceNotResponding"

  #14 opened 3 years ago by kirat68
  6

• functions get_gain_range and get_freq_range should return an array

  #12 opened 3 years ago by kirat68
  8

• Dead lock

  #11 opened 3 years ago by kirat68
  9

• Problem managing two data stream from SDRplay RSPduo

  #10 opened 3 years ago by AugustoMarziani
  10

• How do I change frequency while the flowgraph is running?

  #9 opened 3 years ago by Pratik310commits
  29

• RSPDuo: startup frequencies

  #8 opened 3 years ago by Alster
  4

• Isssues installing gr-osmocom with SDRPlay 3 and GNURadio 3.9

  #7 opened 3 years ago by Pratik310commits
  2

• Problem installing SDRPlay API for Jetson Nano (ARM Ubuntu)

  #6 opened 3 years ago by Pratik310commits
  28

• Scan spectrum

  #5 opened 3 years ago by juriguen
  5

• No module named 'sdrplay3' error

  #4 opened 3 years ago by juriguen
  5

• FindLibSDRplay.cmake registry path (win32)

  #3 opened 4 years ago by guruofquality
  3

• Problem with `dynamic initializer for 'antennas'

  #2 opened 4 years ago by gvanem
  8

• Problem compiling gr-sdrplay3 on Mac

  #1 opened 4 years ago by fventuri
  10