/armbian-onecloud

Armbian for onecloud. 玩客云用armbian

armbian-onecloud

README | 中文文档

All changes were push to the official repository.

Build Parameters

BOARD=onecloud

BRANCH={edge,current,legacy}

BRANCH kernel version Boot Shutdown/Reboot eMMC HDMI VPU
edge xdarklight's v5.18-rc ✔️ ✔️ ✔️ ✔️ ✔️
current v5.14 ✔️ ✔️ ✔️ ❌ ❌
legacy v5.11 ✔️ ✔️ ✔️ ❌ ❌
<=v5.10 ✔️ ✔️ ❌ ❌ ❌
>=v5.15 Take a long time ❌ ✔️ ❌ ❌

BUILD_DESKTOP={no,yes}

See above. Only work with BRANCH=edge

How to boot from u-boot ?

Boot from USB

bootdev="usb 0"
rootdev="/dev/sda2"
usb start
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000

Boot from eMMC

bootdev="mmc 1"
rootdev="/dev/mmcblk1p2"
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000

GPIO

In the board, there is a missing 44-pins chip (WiFi module possibly) which has lots of pins connected to the SoC. They are ablt to be used as GPIO.

Please check the dts (added by patch/kernel/archive/meson-{5.10,5.18}/support-xunlei-onecloud.patch) for more details.

NOTE: These pins were found in V1.0 board. Those in V1.3 board was not confirmed yet.