/RadioShack_Camera

Arduino Library RadioShack camera board 2760248

Primary LanguageC++OtherNOASSERTION

RadioShack_Camera

This is an Arduino library for the RadioShack Camera Board model 2760248. It is based on code provided by RadioShack.

Connect 5v to 5v, Gnd to Gnd, RX to TX and TX to RX. Note that TX and RX will need to be disconnected when you're uploading a sketch to your Arduino (unless you pass a SoftwareSerial to the constructor).

#include <RadioShack_Camera.h>
#include <SD.h>

File photoFile;

#define SD_SELECT_PIN 10

RadioShack_Camera camera(&Serial);

void setup() {
  SD.begin(SD_SELECT_PIN);
  char filename[] = "photo.jpg";
  if (SD.exists(filename)) SD.remove(filename);
  photoFile = SD.open(filename, FILE_WRITE);
  camera.capture_photo(photoFile);
}

void loop() {}