Arduino Watering System
This is a simple controller to allow programmable watering of plants. It basically controls a pump (PWM capable) via a transistor (TIP-122).
The sketch receives commands via the serial interface.
####Commands available over serial/bluetooth (case-sensitive):####
Command | Action |
---|---|
LEDTEST | Makes the led blink 5 times (testing) |
PUMPTEST | Activates the pump for 2 seconds (testing) |
SPEED | Sets the pump speed via PWM (1-255) |
START | Enables the pump |
STOP | Disables the pump |
OVR 1/0 | Enables/Disables Pump Override Stop |
ToDo:
- Add RTC
- Allow programming of RTC via Bluetooth
- Add controls via TCP/IP. (I have no idea how to do it!)