gabrielseibel1/VRTorqueFeedback

Issues

• Cleanup and Organization

  #63 opened 6 years ago by gabrielseibel1
  0

• VR Scenario

  #40 opened 6 years ago by gabrielseibel1
  0

• Improve documentation

  #58 opened 6 years ago by gabrielseibel1
  0

• Pre-rotate feedback speculatively

  #56 opened 6 years ago by gabrielseibel1
  0

• Fix blindspots and singularities

  #57 opened 6 years ago by gabrielseibel1
  1

• Fix "slow start" bug

  #45 opened 6 years ago by gabrielseibel1
  1

• Remove weight of Batteries

  #55 opened 6 years ago by gabrielseibel1
  0

• Rotate Theta Before Phi

  #54 opened 6 years ago by gabrielseibel1
  0

• Report

  #59 opened 6 years ago by gabrielseibel1
  0

• Align weight vertically when no objects attached

  #50 opened 6 years ago by gabrielseibel1
  0

• Fix neutralizing center of mass bug

  #61 opened 6 years ago by gabrielseibel1
  0

• Wireless communication

  #2 opened 6 years ago by gabrielseibel1
  0

• Refine 3D-print hardware

  #10 opened 6 years ago by gabrielseibel1
  0

• Prototype 1

  #9 opened 6 years ago by gabrielseibel1
  0

• Fix axis alignment in prototype 0

  #44 opened 6 years ago by gabrielseibel1
  0

• Make screw holes in base flushed

  #51 opened 6 years ago by gabrielseibel1
  0

• Buy Prototype 1 nuts and bolts

  #48 opened 6 years ago by gabrielseibel1
  0

• Assemble and test Prototype 1

  #49 opened 6 years ago by gabrielseibel1
  0

• 3D model of shell

  #14 opened 6 years ago by gabrielseibel1
  1

• 9v battery 3d model

  #43 opened 6 years ago by gabrielseibel1
  0

• 3D Print Prototype 1

  #47 opened 6 years ago by gabrielseibel1
  0

• Create weight-bed to attach to tip

  #52 opened 6 years ago by gabrielseibel1
  0

• 3D-Print Shell

  #8 opened 6 years ago by gabrielseibel1
  1

• Fix VIVE controller model

  #21 opened 6 years ago by gabrielseibel1
  0

• Prototype 0

  #7 opened 6 years ago by gabrielseibel1
  0

• Buy/get materials from BOM

  #4 opened 6 years ago by gabrielseibel1
  0

• Test prototype 0 with Unity

  #6 opened 6 years ago by gabrielseibel1
  0

• Assemble prototype 0 hardware

  #5 opened 6 years ago by gabrielseibel1
  0

• 3D print Prototype 0

  #35 opened 6 years ago by gabrielseibel1
  0

• Update hardware list for Prototype 0

  #38 opened 6 years ago by gabrielseibel1
  2

• Power delivery for 2 bigger servos

  #39 opened 6 years ago by gabrielseibel1
  0

• Account for spindle in BOM

  #32 opened 6 years ago by gabrielseibel1
  0

• Fix spacing to align axis

  #30 opened 6 years ago by gabrielseibel1
  1

• Use disco hub, spacer and beam as spindle

  #31 opened 6 years ago by gabrielseibel1
  0

• Add fasteners to Prototype 0

  #28 opened 6 years ago by gabrielseibel1
  1

• Complete BOM for Prototype 1 and 0

  #16 opened 6 years ago by gabrielseibel1
  0

• 3D model of spindle

  #18 opened 6 years ago by gabrielseibel1
  1

• 3D model of disk hub

  #23 opened 6 years ago by gabrielseibel1
  0

• Assembly of Prototype 0

  #25 opened 6 years ago by gabrielseibel1
  0

• Model shell "strap" to controller

  #17 opened 6 years ago by gabrielseibel1
  5

• Choose spindle connector

  #22 opened 6 years ago by gabrielseibel1
  1

• List Parts for Prototype 0

  #19 opened 6 years ago by gabrielseibel1
  0

• Fix VIVE controller model dimensions

  #15 opened 6 years ago by gabrielseibel1
  0

• 3D model of servo

  #12 opened 6 years ago by gabrielseibel1
  1

• 3D model of assembly of 2 servos

  #13 opened 6 years ago by gabrielseibel1
  1

• Integrate pan-and-tilt system

  #20 opened 6 years ago by gabrielseibel1
  0

• Create folder for Prototype 1

  #3 opened 6 years ago by gabrielseibel1
  0

• In VR mode, feedback moves half of desired angles

  #1 opened 6 years ago by gabrielseibel1
  0