This repo contains various scripts to configure for Raspberry Pi. They can also be used with other Linux distributions by making slight changes.
If you want to make your raspberry pi a router or something than you won't have to spent days to make it work. You just have to grab right recipe and put it in correct place and install few basic packages.
First, install dnsmasq because it the backbone of most of the recipes.
sudo apt-get update && sudo apt-get install dnsmasq
List of all recipes with descriptions:
-
wifi-to-eth-route.sh — Share Raspberry WiFi with the device on Lan side. Give WiFi access to a Non-WiFi device.
-
eth-to-wifi-route.sh — Make it WiFi Router.
-
wifi-to-eth-bridge.sh — A layer 3 solution. See #2 for discussion.
Download a recipe to pi user's home directory. For example:
curl -O https://raw.githubusercontent.com/arpitjindal97/raspbian-recipes/master/wifi-to-eth-route.sh
Make the file executable:
sudo chmod 755 wifi-to-eth-route.sh
If using LXDE desktop, edit /home/pi/.config/lxsession/LXDE-pi/autostart:
nano /home/pi/.config/lxsession/LXDE-pi/autostart
And add the last line to start the script automatically after reboot:
@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xscreensaver -no-splash
@point-rpi
sudo bash /home/pi/wifi-to-eth-route.sh
Without desktop (lite version), edit /etc/rc.local with root privilege:
sudo nano /etc/rc.local
And add the following before exit 0 to start script automatically after reboot:
bash /home/pi/wifi-to-eth-route.sh
Be sure to give full path to the file.
That's it! Reboot to see the changes.
sudo reboot
There are few things which can't be automated and has to be done manually. Below are some tips to help you get stuff done.
When you have written the Image file on to the SD Card. Mount the boot partition and create a file named ssh.
Eject the card. Start the Raspberry Pi. You will be able to have SSH connection to it.
After boot the /boot/ssh file gets deleted automatically. So, type this to start ssh service on every boot.
sudo systemctl enable ssh
Connect to RPi through SSH by providing it Ethernet. If you don't any Lan cable lying around than plug the SD card into PC. Mount the second partition of the SD Card.
WiFi connections are stored at /etc/wpa_supplicant/wpa_supplicant.conf. Edit this file with root privilege:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
It should look like this after filling network details:
country=GB
ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
ssid="Home WiFi"
psk="password_goes_here"
}
Configuration for eap should look like this:
network={
ssid="SSID_NAME"
key_mgmt=WPA-EAP
password="PASSWORD"
eap=PEAP
identity="USERNAME"
}
Suggestions and PRs are welcome to make these recipes more useful.
REMOTE ACCESS DATAPLICITY
root access use
su pi
give gio permission to dataplicity so no root access is required
sudo usermod -a -G gpio dataplicity
sudo reboot
DWA 123
https://www.raspberrypi.org/forums/viewtopic.php?p=462982#p462982
If wifi is not working
sudo systemctl disable dhcpcd.service
WALLPAPERS
https://www.wallpaperflare.com/asus-rog-city-neon-lights-wallpaper-bixmx/download/3840x2160
ANDROID SCREEN ON RASPBERRYPI https://snapcraft.io/install/scrcpy/raspbian