Zodiac CNX 4090 iQ Not Working

Question

Zodiac CNX 4090 iQ Not Working

Closed this issue 6 months ago · 18 comments

Zodiac CNX 4090 iQ Not Working:
username: xxxxxxx
first_name: xxxxxxx
last_name: xxxxxxx
serial_number: xxxxxxxxx
robot_name: Limpia Fondos
last_online: "2024-05-29T12:46:24.495000"
temperature: "0"
pressure: N/A
total_hours: 0
error_state: N/A
lift_control: N/A
equipment_id: N/A
cycle_start_time: "2000-01-01T09:00:00.000000"
canister: N/A
running: N/A
model: CNX 4090 iQ

Answer 1 · 2024-06-25T19:57:52.000Z

Hi there, can you check again, there are some updates that might affect you model

Answer 2 · 2024-07-02T20:30:12.000Z

any update? @jordisco

Answer 3 · 2024-07-02T20:40:35.000Z

Hi, the same result, :(

…

-- Sent from Canary On martes, jul 02, 2024 at 10:30 p. m., galletn ***@***.***> wrote: any update? @jordisco —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***> ***@***.***": ***@***.***": "EmailMessage","potentialAction": ***@***.***": "ViewAction","target": "#18 (comment)","url": "#18 (comment)","name": "View Issue"},"description": "View this Issue on GitHub","publisher": ***@***.***": "Organization","name": "GitHub","url": "https://github.com"}}]

Answer 4 · 2024-07-02T20:42:11.000Z

Hi @jordisco can you maybe change your password and send me over your credentials? then I'm willing to have a look. nicolas.gallet@skynet.be

Answer 5 · 2024-07-03T08:00:33.000Z

Hi, sent. El 2 de julio de 2024 a las 22:42:33, galletn ***@***.***) escribió: Hi @jordisco <https://github.com/jordisco> can you maybe change your password and send me over your credentials? then I'm willing to have a look. ***@***.*** — Reply to this email directly, view it on GitHub <#18 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQN65MPX4CX5XDV7BY73YILZKMGDRAVCNFSM6AAAAABIOXLDTCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMBUGM3TOOJZGQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

Answer 6 · 2024-07-03T09:14:35.000Z

Working fine here:make sure you run the latest code! and switch to vacuum. details given by mail.

Answer 7 · 2024-07-03T09:15:20.000Z

works see screens and description

Answer 8 · 2024-07-03T09:28:58.000Z

Wow, yes, work fine, Thanks good job!!!

Answer 9 · 2024-07-03T09:51:28.000Z

Will it be possible to control it in the future, or will we only be able to see the status?

Answer 10 · 2024-07-03T10:24:17.000Z

Hi @jordisco if you correctly add the vacuum entity and add it to your dashbord you are able to stop and start the cleaner:

Answer 11 · 2024-07-03T10:39:58.000Z

When I press start it tells me:

The vacuum/start service could not be called. cannot access local variable 'request' where it is not associated with a value

Answer 12 · 2024-07-03T10:48:20.000Z

Hi @jordisco,

can I use your credentials again? And can you leave the Robot in the pool for a while?

I did not have the chance yet to test it out on the cyclone models, vr works fine.

Otherwise I can ask Alex if I can use his to check.

Thanks!

Answer 13 · 2024-07-03T10:50:43.000Z

ok, that's it

Answer 14 · 2024-07-03T11:18:46.000Z

Can you update one more time and retry: was a very small code issue

Answer 15 · 2024-07-03T11:29:53.000Z

yeeeeeees!!! work fine

Answer 16 · 2024-07-03T11:34:57.000Z

Excellent, thanks for testing!

Let me know if you have any other things that you would like to see or do. I added 2 features that are on my radar in the list: remaining cleaning time & lift function for the VR robots.

Answer 17 · 2024-07-03T11:38:58.000Z

wow, good idea, is possible warning could be added for wheel jams? sorry for mi english.

Answer 18 · 2024-07-03T11:44:17.000Z

yes, I'll have a look if I see this somewhere in what is returned!