White House Web API Standards

Guidelines

This document provides guidelines and examples for White House Web APIs, encouraging consistency, maintainability, and best practices across applications. White House APIs aim to balance a truly RESTful API interface with a positive developer experience (DX).

This document borrows heavily from:

Pragmatic REST

These guidelines aim to support a truly RESTful API. Here are a few exceptions:

RESTful URLs

General guidelines for RESTful URLs

  • A URL identifies a resource.
  • URLs should include nouns, not verbs.
  • Use plural nouns only for consistency (no singular nouns).
  • Use HTTP verbs (GET, POST, PUT, DELETE) to operate on the collections and elements.
  • You shouldn’t need to go deeper than resource/identifier/resource.
  • Put the version number at the base of your URL, for example http://example.com/v1/path/to/resource.
  • URL v. header:
    • If it changes the logic you write to handle the response, put it in the URL.
    • If it doesn’t change the logic for each response, like OAuth info, put it in the header.
  • Specify optional fields in a comma separated list.
  • Formats should be in the form of api/v2/resource/{id}.json

Good URL examples

Bad URL examples

HTTP Verbs

HTTP verbs, or methods, should be used in compliance with their definitions under the HTTP/1.1 standard. The action taken on the representation will be contextual to the media type being worked on and its current state. Here's an example of how HTTP verbs map to create, read, update, delete operations in a particular context:

HTTP METHOD POST GET PUT DELETE
CRUD OP CREATE READ UPDATE DELETE
/dogs Create new dogs List dogs Bulk update Delete all dogs
/dogs/1234 Error Show Bo If exists, update Bo; If not, error Delete Bo

(Example from Web API Design, by Brian Mulloy, Apigee.)

Responses

  • No values in keys
  • No internal-specific names (e.g. "node" and "taxonomy term")
  • Metadata should only contain direct properties of the response set, not properties of the members of the response set

Good examples

No values in keys:

"tags": [
  {"id": "125", "name": "Environment"},
  {"id": "834", "name": "Water Quality"}
],

Bad examples

Values in keys:

"tags": [
  {"125": "Environment"},
  {"834": "Water Quality"}
],

Error handling

Error responses should include a common HTTP status code, message for the developer, message for the end-user (when appropriate), internal error code (corresponding to some specific internally determined ID), links where developers can find more info. For example:

{
  "status" : 400,
  "developerMessage" : "Verbose, plain language description of the problem. Provide developers
   suggestions about how to solve their problems here",
  "userMessage" : "This is a message that can be passed along to end-users, if needed.",
  "errorCode" : "444444",
  "moreInfo" : "http://www.example.gov/developer/path/to/help/for/444444,
   http://drupal.org/node/444444",
}

Use three simple, common response codes indicating (1) success, (2) failure due to client-side problem, (3) failure due to server-side problem:

  • 200 - OK
  • 400 - Bad Request
  • 500 - Internal Server Error

Versions

  • Never release an API without a version number.
  • Versions should be integers, not decimal numbers, prefixed with ‘v’. For example:
    • Good: v1, v2, v3
    • Bad: v-1.1, v1.2, 1.3
  • Maintain APIs at least one version back.

Record limits

  • If no limit is specified, return results with a default limit.
  • To get records 51 through 75 do this:

Information about record limits and total available count should also be included in the response. Example:

{
    "metadata": {
        "resultset": {
            "count": 227,
            "offset": 25,
            "limit": 25
        }
    },
    "results": []
}

Request & Response Examples

API Resources

GET /magazines

Example: http://example.gov/api/v1/magazines.json

Response body:

{
    "metadata": {
        "resultset": {
            "count": 123,
            "offset": 0,
            "limit": 10
        }
    },
    "results": [
        {
            "id": "1234",
            "type": "magazine",
            "title": "Public Water Systems",
            "tags": [
                {"id": "125", "name": "Environment"},
                {"id": "834", "name": "Water Quality"}
            ],
            "created": "1231621302"
        },
        {
            "id": 2351,
            "type": "magazine",
            "title": "Public Schools",
            "tags": [
                {"id": "125", "name": "Elementary"},
                {"id": "834", "name": "Charter Schools"}
            ],
            "created": "126251302"
        }
        {
            "id": 2351,
            "type": "magazine",
            "title": "Public Schools",
            "tags": [
                {"id": "125", "name": "Pre-school"},
            ],
            "created": "126251302"
        }
    ]
}

GET /magazines/[id]

Example: http://example.gov/api/v1/magazines/[id].json

Response body:

{
    "id": "1234",
    "type": "magazine",
    "title": "Public Water Systems",
    "tags": [
        {"id": "125", "name": "Environment"},
        {"id": "834", "name": "Water Quality"}
    ],
    "created": "1231621302"
}

POST /magazines/[id]/articles

Example: Create – POST http://example.gov/api/v1/magazines/[id]/articles

Request body:

[
    {
        "title": "Raising Revenue",
        "author_first_name": "Jane",
        "author_last_name": "Smith",
        "author_email": "jane.smith@example.gov",
        "year": "2012",
        "month": "August",
        "day": "18",
        "text": "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam eget ante ut augue scelerisque ornare. Aliquam tempus rhoncus quam vel luctus. Sed scelerisque fermentum fringilla. Suspendisse tincidunt nisl a metus feugiat vitae vestibulum enim vulputate. Quisque vehicula dictum elit, vitae cursus libero auctor sed. Vestibulum fermentum elementum nunc. Proin aliquam erat in turpis vehicula sit amet tristique lorem blandit. Nam augue est, bibendum et ultrices non, interdum in est. Quisque gravida orci lobortis... "
    }
]

Mock Responses

It is suggested that each resource accept a 'mock' parameter on the testing server. Passing this parameter should return a mock data response (bypassing the backend).

Implementing this feature early in development ensures that the API will exhibit consistent behavior, supporting a test driven development methodology.

Note: If the mock parameter is included in a request to the production environment, an error should be raised.

JSONP

JSONP is easiest explained with an example. Here's one from StackOverflow:

Say you're on domain abc.com, and you want to make a request to domain xyz.com. To do so, you need to cross domain boundaries, a no-no in most of browserland.

The one item that bypasses this limitation is <script> tags. When you use a script tag, the domain limitation is ignored, but under normal circumstances, you can't really DO anything with the results, the script just gets evaluated.

Enter JSONP. When you make your request to a server that is JSONP enabled, you pass a special parameter that tells the server a little bit about your page. That way, the server is able to nicely wrap up its response in a way that your page can handle.

For example, say the server expects a parameter called "callback" to enable its JSONP capabilities. Then your request would look like:

    http://www.xyz.com/sample.aspx?callback=mycallback

Without JSONP, this might return some basic javascript object, like so:

    { foo: 'bar' }

However, with JSONP, when the server receives the "callback" parameter, it wraps up the result a little differently, returning something like this:

    mycallback({ foo: 'bar' });

As you can see, it will now invoke the method you specified. So, in your page, you define the callback function:

    mycallback = function(data){
        alert(data.foo);
    };

http://stackoverflow.com/questions/2067472/what-is-jsonp-all-about?answertab=votes#tab-top