gardner-lab/printimage

Issues

• Load STL should manage aspect ratio

  #41 opened 7 years ago by bwpearre
  0

• Changing directory breaks vignetting calibration

  #40 opened 7 years ago by bwpearre
  1

• Power calibration should respect selected zoom

  #39 opened 7 years ago by bwpearre
  0

• Remove rotation-only stage

  #38 opened 7 years ago by bwpearre
  0

• Power test is broken

  #37 opened 7 years ago by bwpearre
  0

• Should ad-hoc power compensation be applied AFTER vignetting compensation?

  #36 opened 7 years ago by bwpearre
  0

• Add wait for hexapod settle time

  #35 opened 7 years ago by bwpearre
  0

• Can't restart PrintImage with PI hexapod

  #34 opened 7 years ago by bwpearre
  0

• Compensate for vignetting

  #27 opened 7 years ago by bwpearre
  1

• Slow stage is inaccurate!

  #14 opened 7 years ago by bwpearre
  2

• Entering 0 in any size box breaks stuff

  #32 opened 7 years ago by bwpearre
  1

• align_stages() needs to reset the rotation coordinate system before calibration

  #33 opened 7 years ago by bwpearre
  0

• Vignetting compensation

  #31 opened 7 years ago by bwpearre
  0

• Use voxel left/right edges, not centres

  #30 opened 7 years ago by bwpearre
  0

• Offline voxelisation

  #29 opened 8 years ago by bwpearre
  0

• Update hexapod soft motion limits based on objective position

  #28 opened 8 years ago by bwpearre
  0

• Calibrate on Z axis

  #15 opened 8 years ago by bwpearre
  1

• Lost calibration on Resonant axis

  #26 opened 8 years ago by bwpearre
  1

• Print items in centre of frame

  #4 opened 8 years ago by bwpearre
  2

• Z stitching is wrong

  #25 opened 8 years ago by bwpearre
  1

• The GUI loses a widget if you ask for X to be z and Z to be z or etc.

  #24 opened 8 years ago by bwpearre
  0

• Search for thing

  #22 opened 8 years ago by bwpearre
  1

• Allow tracking of stage rotation

  #23 opened 8 years ago by bwpearre
  1

• Sinusoid power compensation

  #5 opened 8 years ago by bwpearre
  2

• Center objects in fov

  #20 opened 8 years ago by Christos-Michas
  1

• Load/Save voxelisation

  #21 opened 8 years ago by Christos-Michas
  1

• Size is incorrect

  #1 opened 8 years ago by bwpearre
  3

• Voxelise and print in parallel

  #11 opened 8 years ago by bwpearre
  1

• Save image stack from print job

  #18 opened 8 years ago by Christos-Michas
  1

• Print Preview

  #16 opened 8 years ago by bwpearre
  1

• Why is add_scale_bar() using bounds_best?

  #17 opened 8 years ago by bwpearre
  1

• batch mode

  #19 opened 8 years ago by Christos-Michas
  0

• Scale bar

  #13 opened 8 years ago by bwpearre
  1

• Need "cancel" button

  #10 opened 8 years ago by bwpearre
  1

• Empty or mostly-empty voxels are screwed up

  #7 opened 8 years ago by bwpearre
  1

• Need more "home" buttons

  #8 opened 8 years ago by bwpearre
  1

• Rescale doesn't work

  #9 opened 8 years ago by bwpearre
  1

• Add a waitbar

  #12 opened 8 years ago by bwpearre
  1

• FastZ control still broken

  #2 opened 8 years ago by bwpearre
  1

• Zoom control

  #6 opened 8 years ago by bwpearre
  1

• Respect all 3 dimensions for size limits

  #3 opened 8 years ago by bwpearre
  1