garubi/Push-Push-Air

Issues

• Support "standard boards" without battery

  #26 opened 2 days ago
  0

• Nella versione pedaliera con Digitech, il led è sempre acceso e si spegne quando se premo, o lampeggia per segnalare la carica

  #25 opened 2 days ago
  0

• Nella versione pedaliera con Digitech, in modalità Wifi il led non si accende

  #24 opened 2 days ago
  0

• Send keystrokes via USB as well

  #23 opened 3 days ago
  1

• The button press at startup is read only if usb connected

  #21 opened 2 years ago
  0

• the charge signal 85% max... do I need to calibrate?

  #20 opened 2 years ago
  0

• Meybe move the pin configuration to an header file?

  #19 opened 4 days ago
  0

• probably we can get rid of btnReadingSettle

  #15 opened 2 years ago
  0

• add version number to the sketch

  #14 opened 2 years ago
  0

• When loose connection then reconnects, it sends the Keystrokes but the devices doesn't react

  #13 opened 2 years ago
  1

• Better styling of webpage for config

  #12 opened 2 years ago
  1

• add support for 1 or 2 modifier keys (CTRL, SHIFT, etc...)

  #11 opened 2 years ago
  0

• provide a "reset to factory settings" button in web page

  #9 opened 2 years ago
  0

• Provide a way to reset SSID and Password (a buttons combination at startup?)

  #7 opened 2 years ago
  0

• The SSID should became the BLE device's name too...

  #6 opened 2 years ago
  0

• If the access point remains IDLE for some time it should disconnect and turn off the wifi automatically

  #5 opened 2 years ago
  0

• WiFi and Access Point should be activated only on demand

  #4 opened 2 years ago
  0

• get rid of the delay() call

  #3 opened 2 years ago
  0