Pinned Repositories
Arduino_Personal
Arduino Source Code Files
C--DataLogger
C# based data logger to receive data in, graph it, and store it in a file.
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
marlin-mingda-md-d301-Rock-3
Unofficial Marlin firmware for the Mingda MD D301 board used on the Rock 3, Rock 3 Pro, D2, and other printers
OctoPrint-FirmwareUpdater
OctoPrint plugin for flashing pre-compiled firmware images to a 3D printer.
pypboy
Python/Pygame interface, emulating that of the Pipboy-3000 MK IV. Uses OSM for map data and has been partially tailored to respond to physical switches over Raspberry Pi's GPIO and HyperPixel 4.0 display
rosserial
A ROS client library for small, embedded devices, such as Arduino. See: http://wiki.ros.org/rosserial
garytarasoff's Repositories
garytarasoff/Arduino_Personal
Arduino Source Code Files
garytarasoff/C--DataLogger
C# based data logger to receive data in, graph it, and store it in a file.
garytarasoff/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
garytarasoff/marlin-mingda-md-d301-Rock-3
Unofficial Marlin firmware for the Mingda MD D301 board used on the Rock 3, Rock 3 Pro, D2, and other printers
garytarasoff/OctoPrint-FirmwareUpdater
OctoPrint plugin for flashing pre-compiled firmware images to a 3D printer.
garytarasoff/pypboy
Python/Pygame interface, emulating that of the Pipboy-3000 MK IV. Uses OSM for map data and has been partially tailored to respond to physical switches over Raspberry Pi's GPIO and HyperPixel 4.0 display
garytarasoff/rosserial
A ROS client library for small, embedded devices, such as Arduino. See: http://wiki.ros.org/rosserial