gazoodle/geckolib

Issues

• Overheating, and consequences?

  #51 opened 2 months ago by ralphjohnson
  3

• Windows Integration for Async

  #53 opened 2 months ago by mcsSolutions
  0

• protocol between in.touch and controller?

  #50 opened 4 months ago by Elwell
  2

• Endless E2000 External Lights

  #35 opened 2 years ago by dgwilson
  4

• Moving repo to a shared repo?

  #47 opened 8 months ago by feens
  8

• communication with Loxone smart home

  #45 opened 7 months ago by damoxn
  2

• Optimise CPU usage - tweak ASYNCIO_SLEEP_TIMEOUT_FOR_YIELD

  #31 opened 7 months ago by Ghawken
  4

• Bain Ultra tub in.touch2 / invalid driver pack

  #41 opened a year ago by sethgregory
  1

• PIP is WARNING that 'python-version>="3.7"' is now a non-standard dependency specifier. It wiil be enforced soon!!

  #44 opened 7 months ago by maegibbons
  1

• ModuleNotFoundError: No module named 'geckolib.driver.packs.'

  #46 opened 8 months ago by 55nevets
  1

• Onzen (Salt Water System) Support

  #32 opened 2 years ago by feens
  4

• Set/synchronize the spa clock?

  #43 opened a year ago by rct
  0

• Mr Steam/Steamlinx handling

  #6 opened 4 years ago by rct
  13

• Cloud API

  #42 opened a year ago by djfanatix
  0

• IndexError: list index out of range

  #40 opened 2 years ago by AlbertHakvoort
  2

• control status of circulation pump

  #39 opened 2 years ago by thomasklein1975
  0

• Need help getting reminders

  #38 opened 2 years ago by rrov1
  1

• Help needed with connection error handling using geckolib

  #37 opened 2 years ago by rrov1
  2

• Problem getting async example to work

  #36 opened 2 years ago by gizmocuz
  0

• Issue while install of

  #34 opened 2 years ago by thomasklein1975
  5

• in.mix 300

  #14 opened 4 years ago by jak1502
  6

• High CPU usage using async part

  #33 opened 2 years ago by kalinrow
  1

• Getting a Traceback Error

  #28 opened 3 years ago by Zippochonda
  2

• Library uses `readline` which isn't available on Windows

  #16 opened 3 years ago by gazoodle
  1

• Handling of disconnected module (WARNING Couldn't find new handler for b'RFERR')

  #15 opened 3 years ago by rct
  7

• Installing Gecko V0.0.8 on fresh HA install

  #27 opened 3 years ago by simonk1969
  61

• Full support for Whirlcare Prestige Spa

  #29 opened 3 years ago by ahochsteger
  0

• Run time error: Spa took too long to connect

  #12 opened 3 years ago by eranjo
  95

• More simple examples of getting status?

  #18 opened 3 years ago by insaneoctane
  2

• Geckoshell warning couldn't find new handler for STATV

  #22 opened 3 years ago by rct
  5

• Version not found

  #26 opened 3 years ago by mmillmor
  5

• Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-install-YJ5OrL/geckolib/

  #19 opened 3 years ago by mawhot
  4

• In.touch version 1

  #4 opened 3 years ago by consolecwby
  4

• Exception: Cannot find XML configuraton for inYT v65 error on startup

  #23 opened 3 years ago by ca-equinoxe
  1

• STATP handling

  #20 opened 4 years ago by maegibbons
  11

• Tracking temperature, heater usage, other energy related stats

  #8 opened 4 years ago by rct
  7

• No Entities for connected in.touch2 module

  #17 opened 4 years ago by RhinoRich
  1

• How to refresh data

  #11 opened 4 years ago by jak1502
  2

• Expose Smart Winter Mode (SWMStatus) and Filter (FilterStatus)

  #7 opened 4 years ago by chicago6061
  2

• Water Heater _current_operation incorrect

  #10 opened 4 years ago by chicago6061
  1

• P1 twice

  #3 opened 4 years ago by sicarriere
  7

• Tried the update

  #1 opened 4 years ago by walterb65
  4

• Stop error with two spas in get_spa_from identifier

  #9 opened 4 years ago by SchmidSP
  4

• Do you want anything returned from the new version?

  #2 opened 4 years ago by mcfarlde
  2