Actions-OP

Building your OpenWrt project using GitHub Actions

Template generated by P3TERX: https://github.com/P3TERX/Actions-OpenWrt/

And source code cloned from Lienol: https://github.com/Lienol/openwrt/

Many thanks to their contribuction for providing great things

新增通过release下载相对应固件，版本发布以release tag为主。

Architecture

基础配置文件基于intel x64架构，提供grub和efi两种bios启动方式，固定root分区大小为300M

openwrt内核版本为21.02稳定版，luci版本使用18.06

支持使用ipv6，支持usb2.0/3.0的存储，网卡，声卡模式
文件系统支持包含exfat,ext4,f2fs,squashfs,vfat,fuse,不支持ntfs(只读)
集成snmpd, ttyd等控件，并加入了docker框架及管理页面方便构建私有容器
有线网卡驱动按需选择，基础配置文件只包含e1000,e1000e,igb和vmxnet3(ESXI,PVE虚拟网卡)，不包含无线网卡驱动集成
Luci-app: ADH, Adbyby+, Autoreboot, Baidupcs-web, CIFS-Server, Dockerman, Tcpdump(可视化抓包), DDNS(aliyun, cloudflare, dnspod), Filetransfer(方便安装.ipk), Fileassistant, NPS, KMS, MiniDLNA, SFTP, SmartDNS, TurboAcc, U-Netease-Music等
一些命令行工具: curl, wget, gzip, tar, nano, screen, findutils, mountutils, open-vm-tools等

Usage

注册并登陆你的Github账户
点击右上角 Fork 后会变成你的仓库
修改diy.sh和third_party.sh文件，增加你所需要的软件源，修改默认ip地址，并可增加更多自定义内容
开始编译任务，上传你的 .config 文件覆盖原来的文件(建议基于这里的基础配置文件做修改，可以避免编译过程中不必要的出错)
```
##使用ubuntu进行源码编译生成配置文件的方法
make defconfig
./scripts/diffconfig.sh > seed.config
mv seed.config .config
```
上传完成后点击进入Actions页面，选择相应的Workflow，通过点击 Run workflow 并选择是否在编译过程中打开SSH主机，Workflow将开始工作，编译进度可以在Actions相应的任务中查看
在MENU做完增删改除后，待编译过程结束后(大约需要2.5小时)，可以在 Artifacts 中找到你编译好的固件，开启 build-openwrt.yml 里面的 UPLOAD_COWTRANSFER 和 UPLOAD_WETRANSFER 可同时将编译好的固件上传到 cowtransfer 和 wetransfer 方便国内环境下载
可以在随后的Releases中找到编译好的固件

Sign up and sign in to your Github Account.
Click the right up corner Fork to your repository.
Edit the diy.sh file and third_party.sh file while you could add external source packages, modify default ip address, and even more out of your imagine.
Begin the compile task, upload your predefined .config file (But suggest modifying params based on this config file to avoid unnecessary errors during compilation).
To start the workflow, click the Actions page and choose the specified workflow stream, click the Run workflow button and select whether you need to SSH to the host. The compilation progress could be found on corresponding task in the Action page.
After you complete amending, wait the process about 2.5 hrs to run and later you would download your openwrt firmwares on Artifacts.
The firmwares could also be found on the latest release page.

gb0k/Actions-OP

Actions-OP

Architecture

Usage