Pinned Repositories
Adafruit-GFX-Library
Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries derive from
arduino-builder
A command line tool for compiling Arduino sketches
arduino-mcp2515
Arduino MCP2515 CAN interface library
Arduino_STM32
Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards. There is also Alpha support for GD32F103 based boards
Artery-AT32-PlatformIO
PlatformIO platform and framework for Artery AT32 MCU
bitBangedSPI
SPI class for Arduino Uno and similar
Chorus-RF-Laptimer
rx5808-Diversity-RealAcc-Compatible
RX5808 Diversity RealAcc Compatible
rx5808-pro-diversity
DIY project to create your own 5.8ghz FPV diversity basestation - based off the rx5808 receiver module. Project includes basic Arduino Nano implementation to advanced custom PCB board and introduction to digital switches 4066 chip.
TARANIS_MK_NETTRAPTOR
Mikrokopter Data to FrSky TARANIS telemetry
gc9n's Repositories
gc9n/rx5808-Diversity-RealAcc-Compatible
RX5808 Diversity RealAcc Compatible
gc9n/arduino-builder
A command line tool for compiling Arduino sketches
gc9n/arduino-mcp2515
Arduino MCP2515 CAN interface library
gc9n/Arduino_STM32
Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards. There is also Alpha support for GD32F103 based boards
gc9n/Artery-AT32-PlatformIO
PlatformIO platform and framework for Artery AT32 MCU
gc9n/CANHackerProject
gc9n/CC1101-ESP-Arduino
ESP8266 / ESP32 / Arduino driver lib for using the great TI C1101 transceiver
gc9n/channel3
ESP8266 Analog Broadcast Television Interface
gc9n/esp8266_deauther
ESP8266 deauther
gc9n/CANPower
Accessory power controller for BMW CAN bus bikes
gc9n/Easy-IoT-Arduino-CC1101
An easy to use Arduino library to send and receive messages between IoT devices (such as the ESP32's or Arduino devices) when using the Texas Instruments CC1101 Low-Power Sub-1GHz RF Transceiver
gc9n/esp32-mcp2515
MCP2515 CAN interface library for using on esp32/esp8266
gc9n/ESPboy_Sub1GhzScanner
ESPboy Sub1GhzScaner using CC1101 module
gc9n/EvilCrowRF-V2
gc9n/io433
gc9n/lilygo-lvgl-demo
gc9n/Lime_Gen3_IoT_Replacement
Custom IoT for Lime Gen 3 E-Scooter and info about serial communication
gc9n/MTool
Nodemcu RF433 Tool
gc9n/nucleo_L476RG_1kHz_sine_with_100_samples_DMA
making 1kHz sine wave with 100 samples using DMA
gc9n/Nucleo_L476RG_DAC
Playing WAV data with Nucleo-L476RG DAC
gc9n/RaceFlight-One
RaceFlight One
gc9n/RadioLib
Universal wireless communication library for embedded devices
gc9n/ResponsiveAnalogRead
Arduino library for eliminating noise in analogRead inputs without decreasing responsiveness.
gc9n/RFmoggy
NodeMCU ESP8266 CC1101 Sub1GHz OOK transmitter & brute forcer w/ pre-saved signals (e.g. TouchTunes Jukebox)
gc9n/RollJam
Uses CC1101's to create a replay attack against rolling codes
gc9n/ssd1327
This is the ssd1327 driver package for 128X96 oled display.
gc9n/stm32
STM32 stuff
gc9n/stm32-ssd1306
STM32 library for working with OLEDs based on SSD1306, SH1106, SH1107 and SSD1309, supports I2C and SPI
gc9n/TDisplayAmoled
gc9n/Willy_Firmware_CC1101_ESP32_Display_Touchscreen
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.