gt7dashboard

gt7dashboard is a live dashboard for Gran Turismo 7. Based on the recent discovery of the telemetry interface of GT7 described here first. This began as a fork of Bornhalls gt7telemetry.

See the Manual for detailed instructions.

Features

Time Diff Graph between Last Lap and Reference Lap
- Under dashed line is better and over dashed line is worse than Reference Lap
Race Line view with speed peaks and valleys of last lap and reference lap
Speed/Distance Graph for Last Lap, Reference Lap and Median Lap
- Median Lap is calculated by the median of all recent laps
Speed Variance Graph showing speed deviation in your best laps
Picker for Reference Lap
- Default is Best Lap
Throttle/Distance Graph
Braking/Distance Graph
Coasting/Distance Graph
Race Line Graph
Table of Speed Peaks and Valleys. Compared between reference and last lap
Relative Fuel Map for choosing the right Fuel Map setting in order to reach distance, remaining time and desired lap times
List off all recent laps with additional metrics, measured in percentage * 1000 for better readability
Additional data for tuning such as Max Speed and Min Body Height
Ability to Save current laps and reset all laps
Race Lines for the most recent laps depicting throttling (green), braking (red) and coasting (blue)
Additional "Race view" with only fuel map
Optional Brake Points (slow) when setting GT7_ADD_BRAKEPOINTS=true
Add additional laps from the race lap table to the diagrams

Get Telemetry of a Demonstration lap or Replay

Enable the "Always Record" checkbox to always record replays. Otherwise, will only the laps you are actually driving are recorded.

How to run

You will have to have a running Python installation. Look here for instructions.

If you are on Windows
- Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/
- Run the file run.ps1 with a double click
If you are on MacOS run the file run.command
If you are on Linux run the file run.sh

The commands pip3 or python3 may be different on your OS. Try pip or python instead.

How to run for experienced users

(Once) pip3 install -r requirements.txt to install Python dependencies
1. On Windows: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/
(Optional, Once) Download the list of car names with python3 helper/download_cars_csv.py. Without this file, car names will only show as CAR-ID-123.
Running the Dashboard
- (Mac/Linux) bokeh serve . (when inside the gt7dashboard folder)
- (Windows) python -m bokeh serve . (when inside the gt7dashboard folder)
(Optional) Running the Dashboard with a custom IP
- (Mac/Linux) GT7_PLAYSTATION_IP=<CONSOLE IP ADDRESS> bokeh serve . (when inside the gt7dashboard folder)
- (Windows) set GT7_PLAYSTATION_IP=<CONSOLE IP ADDRESS> and python -m bokeh serve . (when inside the gt7dashboard folder)

Troubleshooting

If you run into TimeoutErrors make sure to check your firewall. You may have to enable UDP connections on port 33740 or 33739.

Docker

There is a Dockerfile and readily made images available.

# If building from the Dockerfile
docker build -t gt7dashboard /home/user/work/gt7dashboard

# If pulling from this repo
docker pull ghcr.io/snipem/gt7dashboard:main

docker run -d --restart unless-stopped \
  --name gt7dashboard \
  --user 1002 \
  -p 5006:5006/tcp \
  -p 33740:33740/udp \
  -v /home/user/gt7data/:/usr/src/app/data \
  -e BOKEH_ALLOW_WS_ORIGIN=domain_of_server:5006 \
  -e GT7_PLAYSTATION_IP=<playstation ip> \
  -e TZ=Europe/Berlin \
  gt7dashboard

This is a sample docker-compose configuration:

    gt7dashboard:
        build:
            context: /home/user/work/gt7dashboard
        restart: unless-stopped
        container_name: gt7dashboard
        user: "1002"
        ports:
            - "5006:5006/tcp"
            - "33740:33740/udp"
        volumes:
            - /home/user/gt7data/:/usr/src/app/data
        environment:
            - BOKEH_ALLOW_WS_ORIGIN=domain_of_server:5006
            - GT7_PLAYSTATION_IP=<playstation ip>
            - TZ=Europe/Berlin

Hint: You should set the GT7_PLAYSTATION_IP env var since Docker containers are not allowed to send UDP broadcasts by default. This is the default behaviour when no IP is set.

Lap Files

If you want to edit your lap files, use a JSON editor. For example cat ... | jq -c '.[0:4]' > ... will shorten the laps to the first 4 laps in the save file.

Contributing

Please add unit tests for all new features, calculations etc.

If you want to add something to the manual, please edit gt7dashboard/gt7help.py and use make doc to generate the README.md.

Manual

Tab 'Get Faster'

Header

The red or green button reflects the current connection status to Gran Turismo 7. i.e. if there was a packet received successfully in the last second, the button will turn green.

Next is a brief description of the last and reference lap. The reference lap can be selected on the right side.

Lap Controls

You can reset all laps with the 'Reset Laps' button. This is helpful if you are switching tracks or cars in a session. Otherwise the different tracks will mix in the dashboard. 'Save Laps' will save your recorded laps to a file. You can load the laps afterwards with the dropdown list to the right.

Time / Diff

This is a graph for showing the relative time difference between the last lap and the reference lap. Everything under the solid bar at 0 is slower than the reference lap. Everything above is slower than the reference lap.

If you see a bump in this graph to the top or the bottom this means that you were slower or faster at this point respectively.

Manual Controls

'Log Lap Now' will log a lap now even you have not crossed the finished line. This is helpful for missions or license tests where the end of a test is not necessarily identical with the finish line.

The checkbox 'Record Replays' will allow you to record replays. Be careful since also background action before and after a time trial is counted as a replay. This is when a car drives on the track in the background of the menu.

In the 'Best Lap' dropdown list you can select the reference lap. Usually this will point to the best lap of the session.

Speed

The total speed of the laps selected. This value is in km/h. or mph. depending on your in-game setting

Race Line

This is a race line map with the last lap (blue) and the reference lap (magenta). Zoom in for more details.

This map is helpful if you are using the index number of a graph to quickly determine where in the lap a measurement was taken.

See the tab 'Race Line' for a more detailed race line.

Peaks and Valleys

A list of speed peaks and valleys for the selected laps. We assume peaks are straights (s) and valleys are turns (T). Use this to compare the difference in speed between the last lap and the reference lap on given positions of the race track.

Speed Deviation (Spd. Dev.)

Displays the speed deviation of the fastest laps within a 5.0% time difference threshold of the fastest lap. Replay laps are ignored. The speed deviation is calculated as the standard deviation between these fastest laps.

With a perfect driver in an ideal world, this line would be flat. In a real world situation, you will get an almost flat line, with bumps at the corners and long straights. This is where even your best laps deviate.

You may get some insights for improvement on your consistency if you look at the points of the track where this line is bumpy.

The list on the right hand side shows your best laps that are token into consideration for the speed variance.

I got inspired for this diagram by the Your Data Driven Podcast. On two different episodes of this podcast both Peter Krause and Ross Bentley mentioned this visualization. If they had one graph it would be the deviation in the (best) laps of the same driver, to improve said drivers performance learning from the differences in already good laps. If they could do it once, they could do it every time.

Throttle

This is the amount of throttle pressure from 0% to 100% of the laps selected.

Yaw Rate / Second

This is the yaw rate per second of your car. Use this to determine the Maximum Rotation Point (MRP). At this point you should normally accelerate.

Suellio Almeida introduced this concept to me. See here for more information.

Braking

This is the amount of braking pressure from 0% to 100% of the laps selected.

Coasting

This is the amount of coasting from 0% to 100% of the laps selected. Coasting is when neither throttle nor brake are engaged.

Gear

This is the current gear of the laps selected.

RPM

This is the current RPM of the laps selected.

Boost

This is the current Boost in x100 kPa of the laps selected.

Tire Speed / Car Speed

This is the relation between the speed of the tires and the speed of the car. If your tires are faster than your car, your tires might be spinning. If they are slower, your tires might be blocking. Use this judge your car control.

Time Table

A table with logged information of the session. # is the number of the lap as reported by the game. There might be multiple laps of the same number if you restarted a session. Time and Diff are self-explaining. Info will hold additional meta data, for example if this lap was a replay. Fuel Consumed is the amount of fuel consumed in the lap.

What follows know are simple metrics for the characteristics of the lap. This is counted as ticks, which means instances when the game reported a state. For example Full Throttle = 500 means that you were on full throttle during 500 instances when the game sent its telemetry. The same goes for Full Break, Coast and Tire Spin. Use this to easily compare your laps.

You can click on one of these laps to add them to the diagrams above. These laps will be deleted if you reset the view or reload the page.

Car will hold the car name. You will have to have the db/cars.csv file downloaded for this to work.

Fuel Map

This fuel map will help to determine the fuel setting of your car. The game does not report the current fuel setting, so this map is relative. The current fuel setting will always be at 0. If you want to change the fuel to a leaner setting count downwards with the amount of steps left. For example: If you are at fuel setting 2 in the game and want to go to the games fuel setting 5, have a look at Fuel Lvl. 3 in this map. It will give you a raw assumption of the laps and time remaining and the assumed time difference in lap time for the new setting.

Tuning Info

Here is some useful information you may use for tuning. Such as Max Speed and minimal body height in relation to the track. The later seems to be helpful when determining the possible body height.

Tab 'Race Line'

This is a race line map with the last lap (blue) and the reference lap (magenta). This diagram does also feature spead peaks (▴) and valleys (▾) as well as throttle, brake and coasting zones.

The thinner line of the two is your last lap. The reference line is the thicker translucent line. If you want to make out differences in the race line have a look at the middle of the reference lap line and your line. You may zoom in to spot the differences and read the values on peaks and valleys.

gediminasz/gt7dashboard