MATLAB MNA

Modified Nodal Analysis by using MATLAB

This program gets an electrical circuit netlist like HSPICE and gives you the Bode (Frequency Response) Plot using Modified Nodal Analysis in MATLAB.

Getting Started

To run the program, first open MATLAB and add to path the src folder and its subfolders.

Open Main.m and assign your netlist file name to the file variable.

The netlist file is similar to HSPICE, but there are some minor differences:

Don’t write ac for independent voltage sources. (Only ac independent voltage sources are supported by this program, so there is no need to mention.)
Also don’t mention ac for the method of analysis.
You must determine the input and output nodes of the circuit for computing the frequency response.
You don’t need to write .end in the last line of the netlist file.
Only integer numbers are allowed to define nodes.
Only these components are supported:
- R (Resistor)
- C (Capacitor)
- L (Inductor)
- V (Voltage Source)
- I (Current Source)
- E (Voltage Controlled Voltage Source)
- G (Voltage Controlled Current Source)
Use the following format to define necessary fields for analysis plot:

.    <min-frequency>    <max-frequency>    <input-node>    <output-node>

***Example-1

Vin	1	0	1
R1	1   	2	10k
C1	2	0	100u

.	0.01	100	1	2

Rabist - view on LinkedIn

Licensed under MIT.