gerardo-junior/hass_openwrt

Home Assistant integration with OpenWrt devices

Home Assistant integration with OpenWrt devices

Features:

• Sensors:
  • Wireless clients counters
  • Number of connected mesh peers
  • Signal strength of mesh links
  • mwan3 interface online ratio
  • WAN interfaces Rx&Tx bytes counters (if configured)
• Switches:
  • Control WPS status
• Binary sensors:
  • mwan3 connectivity status
• Services:
  • Reboot device: openwrt.reboot
  • Execute arbitrary command: openwrt.exec (see the configuration below)

Installing

• OpeWrt device(s):

  • Make sure that uhttpd uhttpd-mod-ubus rpcd packages are installed (if you use custom images)
    • If you use mesh networks, install rpcd-mod-iwinfo package
  • Make sure that ubus is available via http using the manual: https://openwrt.org/docs/techref/ubus
    • To make it right, please refer to the Ubus configuration section below

• Home Assistant:

  • Add this repo as a custom integration using HACS
  • Restart server
  • Go to Integrations and add a new OpenWrt integration

Ubus configuration

• Create new file /usr/share/rpcd/acl.d/hass.json:

{
  "hass": {
    "description": "Home Assistant OpenWrt integraion permissions",
    "read": {
      "ubus": {
        "network.wireless": ["status"],
        "network.device": ["status"],
        "iwinfo": ["info", "assoclist"],
        "hostapd.*": ["get_clients", "wps_status"],
        "system": ["board"],
        "mwan3": ["status"]
      },
    },
    "write": {
      "ubus": {
        "system": ["reboot"],
        "hostapd.*": ["wps_start", "wps_cancel"]
      }
    }
  }
}

• Add new system user hass (or do it in any other way that you prefer):
  • Add line to /etc/passwd: hass:x:10001:10001:hass:/var:/bin/false
  • Add line to /etc/shadow: hass:x:0:0:99999:7:::
  • Change password: passwd hass
• Edit /etc/config/rpcd and add:

config login
        option username 'hass'
        option password '$p$hass'
        list read hass
        list read unauthenticated
        list write hass

• Restart rpcd: /etc/init.d/rpcd restart

Executing command

In order to allow ubus/rpcd execute a command remotely, the command should be added to the permissions ACL file above. The extra configuration could look like below (gives permission to execute uptime command):

{
  "hass": {
    "write": {
      "ubus": {
        /* ... */
        "file": ["exec"]
      },
      "file": {
        /* ... */
        "/usr/bin/uptime": ["exec"]
      }
    },
  }
}

Screenshots: