Manual install URL?
FlatEarthDave opened this issue · 14 comments
This is what I get at the end of the manual install process on a Beaglebone Black Rev. C:
DONE! Minera is ready!
Open the URL: http://192.168.1.18192.168.7.2192.168.6.2/minera/
And happy mining!
Does it work if you use http:///minera/?
That's because you don't have a standard/fresh install of Raspian I think.
That does not work.
I have a fresh debian install on Beaglebone Black, not Raspberry Pi.
The image will not boot, so i have to try manual install
You could try to start from this image https://www.raspberrypi.org/downloads/raspbian/
Then do the manual install again.
I'd need the output of the stats
API call
Please refer to #236
What's the command you used? Can you try with:
echo -n "summary" | nc ANTIMINER_IP 4028
Could you kindly run also this command?
echo -n '{"command":"summary+devs+pools"}' | nc 192.168.1.12 4028
and
echo -n '{"command":"summary+devs+pools"}' | nc 192.168.1.11 4028
This is very useful! If the above stats are correct I found because Z9 Mini doens't work (it misses a part of stats, the main one)
Ok thanks! Everything should work now