How to use elian with aes? (under xxx_elianaes.ko_xxx driver file name)

Set aes 128 encryption first. As below, "1234567812345678" just is aes.
```
iwpriv apcli0 elian aes=1234567812345678 
```
start it in 2.4GHz
```
iwpriv apcli0 elian start
```
stop it
```
iwpriv apcli0 elian stop
```
get result
```
iwpriv apcli0 elian result
```
clear result and try to start/parse the data again
```
iwpriv apcli0 elian clear
```

How to use elian? (under xxx_elianxxx.ko_xxx driver file name)

start it in 2.4GHz
```
iwpriv apcli0 elian start
```
stop it
```
iwpriv apcli0 elian stop
```
get result
```
iwpriv apcli0 elian result
```
clear result and try to start/parse the data again
```
iwpriv apcli0 elian clear
```

linkit-smart-feed

This feeds holds the SDK wifi driver and the config/meta package for the LinkIt Smart 7688 (Duo)

Build the firmware from sources

This section describes how to build the firmware for LinkIt Smart 7688 and LinkIt Smart 7688 Duo from source codes.

Host environment

The following operations are performed under a Ubuntu LTS 14.04.3 environment. For a Windows or a Mac OS X host computer, you can install a VM for having the same environment:

Download Ubuntu 14.04.3 LTS image from http://www.ubuntu.com
Install this image with VirtualBox (http://virtualbox.org) on the host machine. 50GB disk space reserved for the VM is recommanded

Steps

In the Ubuntu system, open the Terminal application and type the following commands:

Install prerequisite packages for building the firmware:

$ sudo apt-get install git g++ make libncurses5-dev subversion libssl-dev gawk libxml-parser-perl unzip wget python xz-utils

Download OpenWrt CC source codes:

$ git clone git://git.openwrt.org/15.05/openwrt.git

Prepare the default configuration file for feeds:

$ cd openwrt
$ cp feeds.conf.default feeds.conf

Add the LinkIt Smart 7688 feed (support mt_wifi_elian.ko_3.18.36x):

$ echo src-git linkit https://github.com/NuxNuxLi/linkit-smart-EK-7688AMx-feed.git >> feeds.conf