ghi-electronics/TinyCLR-Ports

Issues

• How big is Tiny CLR?

  #632 opened 5 years ago by Korporal
  1

• LPC23xx-LPC24xx: LPC24_Flash_GetPartId defined twice

  #623 opened 6 years ago by dobova86
  1

• GpioPin.Read().ToString()

  #631 opened 6 years ago by Se3ker
  5

• Errors Building TinyCLR Build For WifiMCU ERRORS AND SOLUTION

  #625 opened 6 years ago by ajaybnl
  1

• Slow without debugger

  #618 opened 6 years ago by gus-ghielec
  3

• STM32: Pin TX UART seems to be floating

  #600 opened 6 years ago by Palomino34
  1

• FS: Move command doesn't work

  #589 opened 6 years ago by Palomino34
  1

• System.Threading is missing "Name" property

  #590 opened 6 years ago by ChrisInRedford
  0

• Tying P3.30 on G120E to GND causes SDRAM to fail CRC checks

  #564 opened 6 years ago by Arke64
  1

• G120: ADC need to review

  #521 opened 6 years ago by Palomino34
  1

• GPIO interrupt isn't raised correctly.

  #578 opened 6 years ago by Palomino34
  0

• Graphic becomes to bad after ~ 3 minutes

  #562 opened 6 years ago by Palomino34
  0

• Display SupportedDataFormats has the wrong CLR type

  #572 opened 6 years ago by Arke64
  0

• Storage descriptor values are wrong

  #571 opened 6 years ago by Arke64
  0

• Flash storage controllers cannot be acquired more than once

  #570 opened 6 years ago by Arke64
  0

• Add USB get connection status

  #568 opened 6 years ago by Palomino34
  0

• Change pins to default pull-up

  #563 opened 6 years ago by Arke64
  0

• Storage description region size and addresses are wrong

  #544 opened 6 years ago by Arke64
  0

• G120E: "Cannot find any entrypoint"

  #520 opened 6 years ago by Palomino34
  3

• SPI data bit lengths are just 0 on UC5550

  #557 opened 6 years ago by Arke64
  0

• Trying to view the CAN controller in the debug view freezes VS

  #555 opened 6 years ago by Arke64
  0

• Deployment isn't added to api manager

  #545 opened 6 years ago by Arke64
  0

• Enabling CAN before setting timings should throw invalid operation not pin unavailable

  #554 opened 6 years ago by Arke64
  0

• UART DataReceived doesn't track all the data

  #547 opened 6 years ago by Arke64
  0

• Timestamp for HAL events is wrong

  #546 opened 6 years ago by Arke64
  0

• DrawPixel in display controller format should be the native display controller

  #543 opened 6 years ago by Arke64
  0

• DrawString on display doesn't reset row/column on soft reboot

  #542 opened 6 years ago by Arke64
  0

• MicroSD doesn't work on Fez Lemur, PandaIII, CorbaIII

  #541 opened 6 years ago by Palomino34
  1

• Data bit length is incorrect

  #539 opened 6 years ago by Palomino34
  1

• STM32 Uart: Parity Mark and Space need sepecial configuration.

  #537 opened 6 years ago by Palomino34
  1

• SoftwareI2C: Reading value sometime incorrect

  #515 opened 6 years ago by Palomino34
  1

• CAN messages received is smaller than value when set buffer

  #527 opened 6 years ago by Palomino34
  0

• G30: Enable handshaking Uart port 2 cause crash device

  #518 opened 6 years ago by Palomino34
  0

• CTS event: Sometime missing event

  #519 opened 6 years ago by Palomino34
  0

• UC2550: UART B HS doesn't work

  #517 opened 6 years ago by Palomino34
  1

• G120: TinyCLR Config disappear if use serial mode to reboot

  #513 opened 6 years ago by Palomino34
  0

• Serial Mode: Take few times to reset after doing Reset from TinyCLR Config

  #509 opened 6 years ago by Palomino34
  0

• Mounting new SD card after an unmount shouldn't require a new controller

  #506 opened 6 years ago by Palomino34
  1

• G120: mounting different SD doesn't work sometime

  #505 opened 6 years ago by Palomino34
  1

• UC5550: Can't EnterBootloader from TinyCLR config

  #503 opened 6 years ago by Palomino34
  0

• Reduce size by removing "-mlong-calls"

  #501 opened 6 years ago by Palomino34
  0

• FS: System crashed if take out SD after create Controller

  #498 opened 6 years ago by Palomino34
  0

• Display pins in device.h should be broken out by function

  #492 opened 6 years ago by Arke64
  0

• Add interrupt and sleep data to power

  #480 opened 6 years ago by Arke64
  0

• FileSystem: Crash if use native Read / Write sector directly

  #495 opened 6 years ago by Palomino34
  0

• GPIO interrupt is broken

  #496 opened 6 years ago by Palomino34
  1

• FS: Can't Mount file system again after unmounted

  #491 opened 6 years ago by Palomino34
  0

• Try use memcpy for display driver for fast

  #487 opened 6 years ago by Palomino34
  0

• UC5550: Crashed when change from 16 to 32MB in scatter file

  #484 opened 6 years ago by Palomino34
  1

• Remove display backlight out of native driver

  #481 opened 6 years ago by Palomino34
  0