Cannot enable wifi

[GrayJack]

I'm using freeBSD 11.1, and networkmgr 2.2
When I click on Enable Wifi, nothing happens, I'm sure, and networkmgr are sute that wifi card is setup just right.

So, what info you guys need to know what's the cause of the problem?

[ericbsd]

Did you setup doas? On Aug 7, 2017 05:28, "GrayJack" <notifications@github.com> wrote: I'm using freeBSD 11.1 When I click on Enable Wifi, nothing happens, I'm sure, and networkmgr are sute that wifi card is setup just right. So, what info you guys need to know what's the cause of the problem? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#6>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AEDY-NaFvO18wkAzZjNqw604rQRjw8mgks5sVsqigaJpZM4OvIts> .

[GrayJack]

Yes, I did

[ericbsd]

Are you using ligtbm? There is a problem that i try to figure out causing by Lightdm. On Aug 7, 2017 06:24, "GrayJack" <notifications@github.com> wrote: Yes, I did — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AEDY-DqXjh5F4oHVM91GIoofPxsSwKmIks5sVtfggaJpZM4OvIts> .

[GrayJack]

I'm using SLiM

[Deleted user]

what wifi adapater ?

[GrayJack]

The bwn one, I f I remember it correctly it's the Broadcom 43XX

[Deleted user]

that will need firmware built from ports, not available as a pkg.
Please post on forums.ghostbsd.org or join #ghostbsd on freenode for further help.

[ericbsd]

OK can you give me the out put of the commant networkmgr, ifconfig and cat rc.conf.

…

On Aug 7, 2017 06:47, "asxbsd" ***@***.***> wrote: that will need firmware built from ports, not available as a pkg. Please post on forums.ghostbsd.org or join #ghostbsd on freenode for further help. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AEDY-ENMVFiqXzNs-HgnaoNwDM4vTWqjks5sVt04gaJpZM4OvIts> .

[GrayJack]

networkmgr:
Your wired network card is already configured. Your wifi network card is already configured.
ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:26:22:cf:31:eb hwaddr 00:26:22:cf:31:eb inet 192.168.1.36 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 0c:60:76:9a:0a:b0 hwaddr 0c:60:76:9a:0a:b0 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 165 (5825 MHz 11a) regdomain FCC country US authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 23 bmiss 7 mcastrate 6 mgmtrate 6 scanvalid 60 wme roaming MANUAL bintval 0 groups: wlan
cat rc.conf
`hostname="FreeBSD"
keymap="br275.iso.acc.kbd"

Wired network

ifconfig_bge0="DHCP"

Wireless network

wlans_bwn0="wlan0"
ifconfig_wlan0="WPA DHCP"

Others

local_unbound_enable="YES"
sshd_enable="YES"
moused_enable="YES"
powerd_enable="YES"

Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable

dumpdev="AUTO"
dbus_enable="YES"
hald_enable="YES"
slim_enable="YES"
`

[Deleted user]

it turned out to be a firmware iissue.