ghoti57/evofw3

Issues

• nanoCUL not transmitting

  #31 opened 10 months ago by trailro
  18

• Error messages

  #42 opened a year ago by RBL-Hormann-ALK
  4

• ATMega328p stops responding, also weird response to "!F"

  #41 opened a year ago by thigger
  4

• Evofw3 in Domoticz

  #38 opened 2 years ago by roblomq
  7

• nano CUL not working

  #25 opened 2 years ago by jaccol
  11

• Starting tuning process on Raspberry Pi

  #26 opened 2 years ago by Maikel-K
  20

• Header wrong in Wiki

  #34 opened 2 years ago by tomkooij
  1

• Setting controller mode or set point not working from Domoticz

  #6 opened 4 years ago by FrankvdAa
  203

• Strange behavior on Remeha Elga Ace heatpump after activating Nanocul (evofw3) with Home Assistant (ramses_cc)

  #32 opened 2 years ago by henkvdt
  3

• STM8

  #35 opened 2 years ago by pdbayes
  28

• Please add License

  #33 opened 2 years ago by robzed
  0

• No serial communication after successful board programming. nanoCUL board advice needed

  #30 opened 2 years ago by Grish-Lon
  10

• enhancement request: trace flag for device_id

  #20 opened 3 years ago by zxdavb
  1

• No longer working after upgrading to 0.7

  #21 opened 3 years ago by lloyda
  22

• flashing to nanocul not working

  #22 opened 3 years ago by kdw2060
  11

• CC1101 to ATMEGA328P pinning

  #11 opened 3 years ago by GlennWardle
  38

• Is there a 'buy me a beer, coffee' or 'donate to my preferred charity'?

  #8 opened 3 years ago by iMiMx
  0

• Esp8266 or esp32 usefull

  #13 opened 3 years ago by Ierlandfan
  7

• No response on specific command

  #12 opened 4 years ago by reneklootwijk
  10

• can't program this onto my UNO

  #10 opened 4 years ago by GlennWardle
  2

• Please change arduino.h to Arduino.h in tty_usb.cpp

  #9 opened 4 years ago by hughb8on
  1

• no messages

  #5 opened 4 years ago by sveco86
  2

• Sending commands

  #2 opened 4 years ago by dystechnic
  9

• OpenTherm messages on UART branch?

  #3 opened 4 years ago by smar000
  2

• BusWare SSC

  #1 opened 4 years ago by lustasag
  5