mx3000control

Unofficial tool to configure the Perixx MX-3000 mouse on Linux (the official driver only supports Windows).

Uses HIDAPI to send HID feature report commands obtained by analyzing the Windows driver.
Supported features:
- Setting DPI and X/Y sensivity
- Setting RGB LED color, light intensity and pulsation effect
- Configuring the mouse buttons by assigning them mouse functions (like left/right click, back/forward, DPI up/down, etc), single keyboard keys (you need to know the scancode; a list can be found, for example, here) or macros (same features available in the original Windows software; a macro can send keyboard key up/down events and wait delays)

Supported devices

As the name implies, this program is designed to be used with the Perixx MX-3000 mouse. Other mice with the same USB Vendor ID (0x04D9) and Product ID (0xA067) exist; I guess they use the same microcontroller and firmware since they have the same VID:PID pair, but I can't guarantee compatibility. You can test and let me know if you want. However, please always remember (even if using MX-3000) that these devices have an on-board non-volatile memory so there might be some chances to brick them (never happened during my tests with the MX-3000, though; when sending malformed commands, a power cycle always fixed everything). I take no responsibility for any damage you might cause to your devices.

Arch Linux package

If you are using Arch Linux, you can install this program from the AUR. Tha package is mx3000control-git. To use this program on a different distribution/system, see the Building section below.

Development notes

If you are interested in the process behind the development of this program, you may find DEVLOG.md interesting.

Building

You need a C compiler, pkg-config and the HIDAPI library (should be available from your distribution package manager).
Just run make to build; you can override the compiler by setting the CC environment variable (e.g. CC=clang make or CC=gcc make
The output is a single binary: ./mx3000control

Notice

By default, a regular user won't have access to the device. So you need to either run the program with sudo, or configure udev to grant the proper permissions to your user account for the USB device with Vendor ID 0x04D9 and Product ID 0xA067).

Usage examples

Set RGB LED color to orange: ./mx3000control setledcolor 255 127 0
Set led pulsation effect speed to slow: ./mx3000control setledpulsation slow (supported values: steady, slow, middle, fast, or numbers 1 through 4)
Set sensor DPIs to 8200 (the maximum value) ./mx3000control setdpi 8200 (supported values: 600, 1200, 2000, 3000, 4800, 6400, 8200) or ./mx3000control setdpi 7 (min: 1, max: 7)
Remap buttons: mx3000control setbuttons click menu middle-button forward backward dpi-up dpi-down led-color-switch (example configuration; see the in-program help for all the supported possibilities)
Remap buttons, and assign a macro to one of them: mx3000control setbuttons click menu middle-button volume-up volume-down macro-repeat-2-down-0x04-delay-500ms-up-0x04 key-0x05 media-play-pause (again, this is just an example); keyboard keys are identified by their scancode (lists here and here)
Run ./mx3000control help for more information.