(WIP)
The app requires:
-
a programmable DC power supply,
-
a programmable multimeter, capable of measuring resistance.
Each of the devices has to have a communication protocol compliant with the IEE-488.3 standard.
This software is being tested on:
-
KORAD KA3005P programmable DC power supply,
-
SDM3055 programmable multimeter.
mkdir build
cd build
cmake ..
make -j`nproc`
./fetmes --multimeter=<ip of your multimeter> -mmport=<port used by your multimeter> \
--powersupply-serial=<path to the powersupply serial devicee (e.g. /dev/ttACM0)> \
--pwbaudrate=<power supply serial baudrate 9600/115200>
Alternatively if your power supply uses TCP, you may use --powersuppy=<ip> --psport=<port>
and vice versa.
There's also help list if you have any doubts:
./fetmes --help
See: src/cmds.h