gillham/logic_analyzer

Issues

• Sigrok support?

  #38 opened 7 years ago by hackrid
  28

• Error flushing serial port on Windows

  #56 opened a year ago by Sonic-Amiga
  6

• Add supported chips to readme

  #55 opened a year ago by anakimluke
  2

• Please make this installable through arduino library manager

  #46 opened a year ago by Harvie
  4

• Divergence between values

  #53 opened 3 years ago by FernandoGarcia
  3

• Last data when using trigger

  #52 opened 3 years ago by tmk
  0

• Analog input

  #49 opened 6 years ago by Harvie
  2

• It indicated that all CH340 based arduino board fail be detected.

  #33 opened 9 years ago by ulion
  6

• Support for Arduino Due

  #35 opened 3 years ago by 12458
  3

• Detection failed! null on LogicSniffer v0.9.7.2

  #34 opened 3 years ago by Sekhmet
  3

• nice code, great work, thanks

  #31 opened 3 years ago by dhiltonp
  2

• trigger triggers for any single matching bit, not for a set of matching bits

  #30 opened 3 years ago by dhiltonp
  1

• Allow to enable internal pullups at runtime

  #47 opened 6 years ago by Harvie
  1

• Add squarewave output for calibration and testing

  #48 opened 6 years ago by Harvie
  1

• Signal capturing on unused pin

  #50 opened 6 years ago by Harvie
  1

• Continuous Capture Mode?

  #20 opened 10 years ago by chino
  10

• [Arduino IDE 1.8]Sketch can't compile

  #45 opened 6 years ago by ManfredEP
  2

• It records for ~300 ms then stops. how can I make it go longer?

  #36 opened 6 years ago by amrelk
  2

• restrict to 4 channels, get 2x buffer

  #32 opened 9 years ago by dhiltonp
  2

• question , is it possible to run it on arduino nano( 328) or arduino uno ?

  #41 opened 6 years ago by gnkarn
  4

• how i can use arduino uno i cant build the project

  #42 opened 6 years ago by abdelrahma22
  1

• build error

  #43 opened 6 years ago by abdelrahma22
  13

• question , is it possible to run it on arduino nano( 328) or arduino uno ?

  #40 opened 7 years ago by gnkarn
  7

• cannot upload the compiled binary

  #39 opened 7 years ago by eadmaster
  2

• Which sketch to load? What are the cfg files for?

  #37 opened 8 years ago by dylanbaxter
  2

• Not enough memory on ATmega168

  #25 opened 9 years ago by cubic3d
  1

• Problems on Arduino Mega

  #26 opened 10 years ago by mkeller0815
  2

• less channels, more samples ?

  #24 opened 10 years ago by d-a-v
  1

• Debug mode questions

  #18 opened 10 years ago by chino
  5

• Capturing Samples

  #19 opened 10 years ago by chino
  3

• Support for ATmega32u4 (Leonardo boards)

  #23 opened 10 years ago by rmetrich
  3

• Arduino compile error

  #15 opened 10 years ago by audiobugz
  5

• Capturing Analog Data on Digital Pins?

  #21 opened 10 years ago by chino
  12

• Unrolled loops?

  #22 opened 10 years ago by chino
  5

• crash in serial console screen

  #17 opened 10 years ago by chino
  1

• OSX DMG damaged?

  #16 opened 10 years ago by chino
  2

• Unrolled code for 2 and 4 MHz is flawed

  #14 opened 11 years ago by stowite
  3

• Sketch issues

  #13 opened 11 years ago by markncmt
  4

• No/incorrect triggers when using port D

  #12 opened 12 years ago by ricksorensen
  1

• Why not PortD instead of PortB?

  #7 opened 12 years ago by MortenGuldager
  2

• Update ols profiles

  #8 opened 12 years ago by charlesgoyard
  2

• arduino leonardo working config file

  #10 opened 12 years ago by jhax78
  1

• Reducing channel count to increase samples

  #4 opened 12 years ago by rebelzach
  2

• increasing number of channels

  #11 opened 12 years ago by rick2047
  1

• Overusing SRAM on 1024 bytes Arduino (ATMEGA328P)

  #6 opened 13 years ago by MortenGuldager
  1

• Samples before trigger fires

  #5 opened 13 years ago by MortenGuldager
  7

• CAPTURE_SIZE for ATmega186 (20PU)

  #1 opened 13 years ago by f0086
  1