Progressive Image Deraining Networks: A Better and Simpler Baseline

Introduction

This paper provides a better and simpler baseline deraining network by discussing network architecture, input and output, and loss functions. Specifically, by repeatedly unfolding a shallow ResNet, progressive ResNet (PRN) is proposed to take advantage of recursive computation. A recurrent layer is further introduced to exploit the dependencies of deep features across stages, forming our progressive recurrent network (PReNet). Furthermore, intra-stage recursive computation of ResNet can be adopted in PRN and PReNet to notably reduce network parameters with graceful degradation in deraining performance (PRN_r and PReNet_r). For network input and output, we take both stage-wise result and original rainy image as input to each ResNet and finally output the prediction of residual image. As for loss functions, single MSE or negative SSIM losses are sufficient to train PRN and PReNet. Experiments show that PRN and PReNet perform favorably on both synthetic and real rainy images. Considering its simplicity, efficiency and effectiveness, our models are expected to serve as a suitable baseline in future deraining research.

Prerequisites

Python 3.6, PyTorch >= 0.4.0
Requirements: opencv-python, tensorboardX
Platforms: Ubuntu 16.04, cuda-8.0 & cuDNN v-5.1 (higher versions also work well)
MATLAB for computing evaluation metrics

Datasets

PRN and PReNet are evaluated on four datasets*: Rain100H [1], Rain100L [1], Rain12 [2] and Rain1400 [3]. Please download the testing datasets from BaiduYun or OneDrive, and place the unzipped folders into ./datasets/test/.

To train the models, please download training datasets: RainTrainH [1], RainTrainL [1] and Rain12600 [3] from BaiduYun or OneDrive, and place the unzipped folders into ./datasets/train/.

*We note that:

(i) The datasets in the website of [1] seem to be modified. But the models and results in recent papers are all based on the previous version, and thus we upload the original training and testing datasets to BaiduYun and OneDrive.

(ii) For RainTrainH, we strictly exclude 546 rainy images that have the same background contents with testing images. All our models are trained on remaining 1,254 training samples.

Getting Started

1) Testing

We have placed our pre-trained models into ./logs/.

Run shell scripts to test the models:

bash test_Rain100H.sh   # test models on Rain100H
bash test_Rain100L.sh   # test models on Rain100L
bash test_Rain12.sh     # test models on Rain12
bash test_Rain1400.sh   # test models on Rain1400 
bash test_Ablation.sh   # test models in Ablation Study
bash test_real.sh       # test PReNet on real rainy images

All the results in the paper are also available at BaiduYun. You can place the downloaded results into ./results/, and directly compute all the evaluation metrics in this paper.

2) Evaluation metrics

We also provide the MATLAB scripts to compute the average PSNR and SSIM values reported in the paper.

 cd ./statistic
 run statistic_Rain100H.m
 run statistic_Rain100L.m
 run statistic_Rain12.m
 run statistic_Rain1400.m
 run statistic_Ablation.m  # compute the metrics in Ablation Study

Average PSNR/SSIM values on four datasets:

Dataset	PRN	PReNet	PRN_r	PReNet_r	JORDER[1]	RESCAN[4]
Rain100H	28.07/0.884	29.46/0.899	27.43/0.874	28.98/0.892	26.54/0.835	28.88/0.866
Rain100L	36.99/0.977	37.48/0.979	36.11/0.973	37.10/0.977	36.61/0.974	---
Rain12	36.62/0.952	36.66/0.961	36.16/0.961	36.69/0.962	33.92/0.953	---
Rain1400	31.69/0.941	32.60/0.946	31.31/0.937	32.44/0.944	---	---

*We note that:

(i) The metrics by JORDER[1] are computed directly based on the deraining images provided by the authors.

(ii) RESCAN[4] is re-trained with their default settings: (1) RESCAN for Rain100H is trained on the full 1800 rainy images, while our models are all trained on the strict 1254 rainy images. (2) The re-trained model of RESCAN is available at here.

(iii) The deraining results by JORDER and RESCAN can be downloaded from here, and their metrics in the above table can be computed by the Matlab scripts.

3) Training

Run shell scripts to train the models:

bash train_PReNet.sh      
bash train_PRN.sh   
bash train_PReNet_r.sh    
bash train_PRN_r.sh

You can use tensorboard --logdir ./logs/your_model_path to check the training procedures.

Model Configuration

The following tables provide the configurations of options.

Training Mode Configurations

Option	Default	Description
batchSize	18	Training batch size
recurrent_iter	6	Number of recursive stages
epochs	100	Number of training epochs
milestone	[30,50,80]	When to decay learning rate
lr	1e-3	Initial learning rate
save_freq	1	save intermediate model
use_GPU	True	use GPU or not
gpu_id	0	GPU id
data_path	N/A	path to training images
save_path	N/A	path to save models and status

Testing Mode Configurations

Option	Default	Description
use_GPU	True	use GPU or not
gpu_id	0	GPU id
recurrent_iter	6	Number of recursive stages
logdir	N/A	path to trained model
data_path	N/A	path to testing images
save_path	N/A	path to save results

References

[1] Yang W, Tan RT, Feng J, Liu J, Guo Z, Yan S. Deep joint rain detection and removal from a single image. In IEEE CVPR 2017.

[2] Li Y, Tan RT, Guo X, Lu J, Brown MS. Rain streak removal using layer priors. In IEEE CVPR 2016.

[3] Fu X, Huang J, Zeng D, Huang Y, Ding X, Paisley J. Removing rain from single images via a deep detail network. In IEEE CVPR 2017.

[4] Li X, Wu J, Lin Z, Liu H, Zha H. Recurrent squeeze-and-excitation context aggregation net for single image deraining.In ECCV 2018.

Citation

 @inproceedings{ren2019progressive,
   title={Progressive Image Deraining Networks: A Better and Simpler Baseline},
   author={Ren, Dongwei and Zuo, Wangmeng and Hu, Qinghua and Zhu, Pengfei and Meng, Deyu},
   booktitle={IEEE Conference on Computer Vision and Pattern Recognition},
   year={2019},
 }

githahaguai/PReNet