SteelSeries Weather Gauges extension

A WeeWX extension to install the SteelSeries Weather Gauges.

The current SteelSeries Weather Gauges extension version is v2.7.6 which contains SteelSeries Weather Gauges v2.7.6.

Description

The SteelSeries Weather Gauges extension provides an automated installation and default setup of the SteelSeries Weather Gauges used with WeeWX.

Pre-Requisites

The SteelSeries Weather Gauges extension requires WeeWX v3.4.0 or greater.

Note: Symbolic names are used in this document to refer to some file locations on the WeeWX system. These symbolic names allow a common name to be used to refer to a directory that may be different from system to system. The following symbolic names are used in this document:

$DOWNLOAD_ROOT. The path to the directory containing the downloaded SteelSeries Weather Gauges extension.

$HTML_ROOT. The path to the directory where WeeWX generated reports are saved. This directory is normally set in the [StdReport] section of weewx.conf. Refer to where to find things in the WeeWX User's Guide for further information.

Installation

The preferred method to install the SteelSeries Weather Gauges extension is to use the wee_extension utility as follows:

Download the latest SteelSeries Weather Gauges extension from the weewx-steelseries releases page into a directory accessible from the WeeWX machine:
```
$ wget -P $DOWNLOAD_ROOT https://github.com/gjr80/weewx-steelseries/releases/download/v2.7.6/steelseries-2.7.6.tar.gz
```
where $DOWNLOAD_ROOT is the path to the directory where the SteelSeries Weather Gauges extension is to be downloaded.

Install the SteelSeries Weather Gauges extension downloaded at step 1 using the wee_extension utility:

$ wee_extension --install=$DOWNLOAD_ROOT/steelseries-2.7.6.tar.gz

this will result in output similar to the following:

Request to install '/var/tmp/steelseries-2.7.6.tar.gz'
Extracting from tar archive /var/tmp/steelseries-2.7.6.tar.gz
Saving installer file to /home/weewx/bin/user/installer/SteelSeries
Saved configuration dictionary. Backup copy at /home/weewx/weewx.conf.20170320124410
Finished installing extension '/var/tmp/steelseries-2.7.6.tar.gz'

Restart WeeWX:

$ sudo /etc/init.d/weewx restart

$ sudo service weewx restart

$ sudo systemctl restart weewx

This will result in WeeWX generating the WeeWX SteelSeries Weather Gauges data file (gauge-data.txt) and a demonstration page displaying the SteelSeries Weather Gauges (index.html) each report cycle. The generated files can be found in the $HTML_ROOT/ss directory. The demonstration page can be displayed in a browser by pointing it at $HTML_ROOT/ss/index.html.

Further customization of the SteelSeries Gauges can be performed by following the steps in the SteelSeries Weather Gauges wiki.

The SteelSeries Weather Gauges JavaScript and CSS files are copied to the $HTML_ROOT/ss directory during the first report cycle after WeeWX is started.

If the SteelSeries Weather Gauges are to be served by a remote web server then the contents of the $HTML_ROOT/ss directory will need to be transferred from the WeeWX server to the remote web server using the FTP or RSYNC skins of via some other external means.

Support

General support issues may be raised in the Google Groups weewx-user forum. Specific bugs in the SteelSeries Weather Gauges extension code (eg. wee_extension installation errors) should be the subject of a new issue raised via the Issues Page.

Licensing

The SteelSeries Weather Gauges extension is licensed under the GNU Public License v2. The SteelSeries Weather Gauges code included in the SteelSeries Weather Gauges extension is licensed by Mark Crossley under the GNU Public License v2. The SteelSeries Weather Gauges source code included in the SteelSeries Weather Gauges extension is available from the GitHub SteelSeries Weather Gauges repository.