News: 2024 October 10: v1.3.0 uses TLS-1.3 and rpc25519 for transport.
- This makes QUIC available as a transport! It is SOO much faster than TLS or even TCP without TLS, because it can do 0-round trip initiation (env: export GOQ_USE_QUIC=true; this is now the default.)
- Windows compatability was re-established as v1.3.48
- v1.4.0 makes workers keep going by default, since this is the vast majority of uses. In other words,
goq work foreveris now the default, and the forever word is not needed. Nowgoq work oneshotcan be used to do a job and then have the worker stop.
Olds: 2019 January 6: v1.2.0 works on Windows. Looking for the old version? use the v1.0.0-branch tag.
Intro:
Goq (Go-queue, or nothing to gawk at!) is a replacement for job management systems such as Sun GridEngine. (Yeah! No Reverse DNS hell on setup!)
Goq's source is small, compact, and easily extended and enhanced. The main file is goq.go. The main dispatch logic is in the Start() routine, which is less than 300 lines long. This compactness is a tribute to the design of Go, in particular to its uniquely expressive channel/select system.
Goq Features:
-
simple : the system is easy to setup and use. The three roles are server, submitter, and worker. Each is trivial to deploy. See the deploy section below.
-
secure : Unlike most parallel job management systems that have zero security, Goq uses TLS-v1.3 for all communications. This is equivalent to (or better than) the encryption that ssh gives you. You simply manually use scp initially to distribute the .goq directory (which contains the encryption keys created by 'goq init') to all your worker nodes (minus the
.goq/my-keep-private-dirof course). Thus you can create images for cloud use that are ready-to-go on bootup. Only hosts on which you have copied the .goq directory to can submit or perform work for the cluster. -
fast scheduling : unlike other queuing systems (I'm looking at you, gridengine, Torque!?!), you don't have wait minutes for your jobs to start. Workers started with 'goq work' are waiting to receive work, and start processing immediately when work is submitted. If you want your workers to stop after all jobs are done, just 'goq work oneshot' and they will exit after doing one job.
-
easy to setup fault tolerance : jobs are run in isolated process, and can be killed on command. Workers are monitored with heartbeats, and non-responsive workers have their jobs re-queued and re-run. The server can be restarted and the workers will just reconnect once the server comes back up.
-
few dependencies: Goq doesn't depend on setting up any C code or any 3rd party database. It is completely self-contained.
-
simple : didn't I say that already? It's worth saying it again. Goq is simple and predictable, so you can build on it.
Excellent. Working and useful. OSX and Linux/amd64 builds are actively exercised.
-
a)
mkdir -p $GOPATH/src/github.com/glycerine; cd $GOPATH/src/github.com/glycerine -
d)
git clone https://github.com/glycerine/goq; cd goq; make -
c)
goq init -
d) (for testing:) If not already, include $GOPATH/bin in your $PATH. (If running the tests, the test suite needs to be able to find goq in your $PATH).
For example, add a line like this to your ~/.bashrc (assumes GOPATH already set):
# add to your ~/.bashrc
export PATH=$GOPATH/bin:$PATH # might already done.
Then save the ~/.bashrc changes, and source them with
$ source ~/.bashrc # have changes take effect in the current shell
- e)
cd $GOPATH/src/github.com/glycerine/goq; make; go test -v
Goq was built using BDD, so the test suite has good coverage. If 'go test -v' reports any failures, please file an issue.
a) server: On your master node, set the env variable GOQ_HOME to your home directory (must be a directory where Goq can store job output in a subdir). Then do:
$ cd $GOQ_HOME
$ goq init # only needed once.
$ nohup goq serve & # start the central server
b) job submission: 'goq sub mycommand myarg1 myarg2 ...' will submit a job. You can be in any directory; Goq will try to write output to ./o back (by default; controlled by the GOQ_ODIR setting) in that directory. Failing that (if the filesystem on the server is laid out differently from that of the sub host), it will write to $GOQ_HOME. For example:
$ cd somewhere/where/the/job/wants/to/start
# start by doing 'goq sub' on the same machine
# that 'goq serve' was launched on. Just to learn the system.
$ goq sub ./myjobscript
c) workers: Start workers on compute nodes by copying the .goq directory to them, setting GOQ_HOME in the env/your .bashrc. Then launch one worker per cpu with: 'nohup goq work &'. For example (assuming linux where /proc exists):
$ ssh computenode
$ for i in $(seq 1 $(cat /proc/cpuinfo |grep processor|wc -l)); do
/usr/bin/nohup goq work & done
The 'runGoqWorker' script in the Goq repo shows how to automate the ssh and start-workers sequence. Even easier: start them automatically on boot (e.g. in /etc/rc.local) of your favorite cloud image, and workers will be ready and waiting for you when you bring up that image. Do not run Goq as root. Your regular user login suffices, and is safer.
d) on your cloud nodes' firewalls, open tcp:1024-65535 so that goq nodes can communicate. All node's clocks should be synced to the same ntp time-source (or at least to within 10 seconds of each other). Goq will interpret old or repeated-and-identical messages as replay-attacks (or network wierdness) and will ignore them.
There are three fundamental commands to goq, corresponding to the three roles in the queuing system. For completeness, they are:
-
goq serve : starts a jobs server, by default on port 1776. Generally you only start one server; only one is needed for most purposes. Of course with a distinct GOQ_HOME and GOQ_JSERV_PORT, you can run as many separate servers as you wish.
-
goq sub command {arguments}*: submit a job to the job server for running. You can 'goq sub' from anywhere, assuming that GOQ_HOME is set and that the local $GOQ_HOME/.goq contains keys that match those on the server.
-
goq work {oneshot} : request a job from the job server and execute it, returning the result to the server. Wash, rinse, repeat. A worker will loop forever by default. With the 'oneshot' argument, the worker does 'one-shot' behavior: it will wait for one job, do that job, and then stop. Generally you'll want to start a worker on each cpu of each compute node in your cluster. As for any node in your cluster, GOQ_HOME must be set and $GOQ_HOME/.goq must contain current keys.
Additional useful commands
-
goq stat : shows a snapshot of the server's internal state, including running jobs, waiting jobs (if not enough workers), and waiting workers (if not enough jobs).
-
goq kill jobid : kills a previously submitted jobid.
-
goq shutdown : shuts down the job server. Workers stay running, and will re-join the server when it comes back online.
-
goq wait jobid : waits until the specified job has finished. The jobid must be for an already started job. Returns immediately if the job is already done.
-
goq immolateworkers : this sounds bloody, as it is. Normally you should leave your workers running once started. They will reconnect to the server automatically if the server is bounced. If you really need to (e.g. if you must change your server port number), this will tell all listening workers to kill themselves. To avoid accidents, it is deliberately hard-to-type.
Configuration is controlled by these environment variables. Only the GOQ_HOME variable is mandatory. The rest have reasonable defaults. Once you have run 'goq init' the settings are kept in $GOQ_HOME/.goq/serverloc, and should be adjusted there.
-
GOQ_HOME = tells goq processes where to find their .goq directory of credentials. (required)
-
GOQ_JSERV_IP = the ipv4 address of the server. Default: the first external facing interface discovered.
-
GOQ_JSERV_PORT = the port number the server is listening on (defaults to 1776).
-
GOQ_ODIR = the output directory where the server will write job output. Default: ./o
-
GOQ_SENDTIMEOUT_MSEC = milliseconds of wait before timing-out various network communications (you shouldn't need to adjust this, unless traffic is super heavy and your workers aren't receiving jobs). The current default is 1000 msec.
-
GOQ_HEARTBEAT_SEC = time period between heartbeats in seconds. (default: 5 seconds). The server will check on jobs this often, and re-queue those from non-responsive (presumed dead) workers.
-
GOQ_USE_QUIC = false (or true) will disable (enable) QUIC based transport. QUIC uses UDP and TLS-v1.3.
Usually you would start a bunch of remote workers. But goq works just fine with local workers, and this is an excellent way to get familiar with the system before deploying to your cluster.
jaten@i7:~$ export GOQ_HOME=/home/jaten
jaten@i7:~$ goq init
[pid 3659] goq init: key created in '/home/jaten/.goq'.
jaten@i7:~$ goq serve &
[1] 3671
**** [jobserver pid 3671] listening for jobs on 'tcp://10.0.0.6:1776', output to 'o'. GOQ_HOME is '/home/jaten'.
jaten@i7:~$ goq stat
[pid 3686] stats for job server 'tcp://10.0.0.6:1776':
runQlen=0
waitingJobs=0
waitingWorkers=0
jservPid=3671
finishedJobsCount=0
droppedBadSigCount=0
nextJobId=1
jaten@i7:~$ goq sub go/goq/bin/sleep20.sh # sleep for 20 seconds, long enough that we can inspect the stats
**** [jobserver pid 3671] got job 1 submission. Will run 'go/goq/bin/sleep20.sh'.
[pid 3704] submitted job 1 to server at 'tcp://10.0.0.6:1776'.
jaten@i7:~$ goq stat
[pid 3715] stats for job server 'tcp://10.0.0.6:1776':
runQlen=0
waitingJobs=1
waitingWorkers=0
jservPid=3671
finishedJobsCount=0
droppedBadSigCount=0
nextJobId=2
wait 000000 WaitingJob[jid 1] = 'go/goq/bin/sleep20.sh []' submitted by 'tcp://10.0.0.6:46011'.
jaten@i7:~$ goq work & # typically on a remote cpu, local here for simplicity of demonstration. Try 'runGoqWorker hostname' for starting remote nodes.
[2] 3726
jaten@i7:~$ **** [jobserver pid 3671] dispatching job 1 to worker 'tcp://10.0.0.6:37894'.
[pid 3671] dispatched job 1 to worker 'tcp://10.0.0.6:37894'
---- [worker pid 3726; tcp://10.0.0.6:37894] starting job 1: 'go/goq/bin/sleep20.sh' in dir '/home/jaten'
jaten@i7:~$ goq stat
[pid 3744] stats for job server 'tcp://10.0.0.6:1776':
runQlen=1
waitingJobs=0
waitingWorkers=0
jservPid=3671
finishedJobsCount=0
droppedBadSigCount=0
nextJobId=2
runq 000000 RunningJob[jid 1] = 'go/goq/bin/sleep20.sh []' on worker 'tcp://10.0.0.6:37894'.
jaten@i7:~$ # wait for awhile
jaten@i7:~$ ---- [worker pid 3726; tcp://10.0.0.6:37894] done with job 1: 'go/goq/bin/sleep20.sh'
**** [jobserver pid 3671] worker finished job 1, removing from the RunQ
[pid 3671] jobserver wrote output for job 1 to file 'o/out.00001'
jaten@i7:~$ ---- [worker pid 3726; tcp://10.0.0.6:37894] worker could not fetch job: recv timed out after 1000 msec: resource temporarily unavailable.
[2]+ Done goq work
jaten@i7:~$ goq shutdown
[pid 3767] sent shutdown request to jobserver at 'tcp://10.0.0.6:1776'.
[jobserver pid 3671] jobserver exits in response to shutdown request.
jaten@i7:~$
author: Jason E. Aten, Ph.D.