OpenGNB

The communication protocol of opengnb version 1.5.0 has been upgraded and is not compatible
Chinese English

Note: Most of the content of this article is translated by Google translate from the Chinese version of the "OpenGNB User Manual", the content of this article is subject to the Chinese version.

OpenGNB is an open source P2P decentralized Software Defined Virtual Network with extreme intranet penetration capability,Allows you to combine your company-home network into a direct-access LAN.

All code related to the GNB project is released as open source, and the currently released source code supports the following platforms: FreeBSD Linux OpenWRT Raspberrypi OpenBSD macOS

GNB Features

Intranet penetration P2P VPN
- No public IP required
Extreme link capability
- Unlimited speed effects
Data Security
- Reliable authentication between GNB nodes based on elliptic curve digital signature
Multi-platform support
- GNB is developed in C language. It does not need to refer to third-party library files when compiling. It can be easily ported to the current popular operating systems. Currently supported operating systems and platforms include Linux_x86_64, Windows10_x86_64, macOS, FreeBSD_AMD64, OpenBSD_AMD64, Raspberry Pi, OpenWRT; as big as server environment, desktop system, as small as OpenWRT router with only 32M memory can run GNB network very well.

Standard VPN payload forwarding

flowchart LR

subgraph LAN A
nodea[VPN clientA]
end

subgraph WAN
nodef[VPN server]
end

subgraph LAN B
nodeb[VPN clientB]
end

nodea <-- payload ---> nodef <-- payload ---> nodeb

GNB payload standard forwarding

NAT Traversal point to point

flowchart LR

subgraph LAN A
nodeA[gnb nodeA]
end

subgraph WAN
index[gnb public index node]
end

subgraph LAN B
nodeB[gnb nodeB]
end

nodeA -. nodeB address .-  index -. nodeA address.- nodeB
nodeA <-- payload --> nodeB

GNB payload relay forwarding

flowchart LR

subgraph LAN A
nodeA[gnb nodeA]
end

subgraph WAN

nodeC[nodeC]
nodeD[nodeD]
nodeE[nodeE] 
nodeF[nodeF]
nodeJ[nodeJ]
nodeK[nodeK]

nodeG[nodeG]
nodeH[nodeH]
nodeI[nodeI]

end

subgraph LAN B
nodeB[gnb nodeA]
end

nodeA[nodeA] ---- nodeC[nodeC] ---- nodeD[nodeD] ---- nodeE[nodeE] ---- nodeF[nodeF] ---- nodeB[nodeB]
nodeA[nodeA] ---- nodeG[nodeG] ---- nodeH[nodeH] ---- nodeI[nodeI] ---- nodeB[nodeB]
nodeA[nodeA] ---- nodeJ[nodeJ] ---- nodeK[nodeK] ---- nodeB[nodeB]

GNB payload unified forwarding

flowchart LR

subgraph LAN A
nodeA[gnb nodeA]
end


subgraph LAN C
nodeC[gnb nodeC]
end

subgraph LAN D
nodeD[gnb nodeD]
end

subgraph LAN E
nodeE[gnb nodee]
end


subgraph LAN B
nodeB[gnb nodeB]
end


nodeA ---- nodeC & nodeD & nodeE ---- nodeB

GNB payload via tcp forwarding

flowchart LR

subgraph LAN A
nodeA[gnb nodeA]
upd_over_tcp_A[upd_over_tcp]
end


subgraph WAN
upd_over_tcp_B[upd_over_tcp]
nodeB[gnb nodeB]
end

nodeA --UDP payload--- upd_over_tcp_A --TCP payload--- upd_over_tcp_B --UDP payload--- nodeB

GNB Quick Start

Linux platform

Step 1: Download and compile the GNB source code project

git clone https://github.com/gnbdev/opengnb.git
cd opengnb
make -f Makefile.linux install

After compiling, you can get gnb gnb_crypto gnb_ctl gnb_es files in the opengnb/bin/ directory.

Step 2: Quickly deploy GNB nodes

Copy gnb gnb_crypto gnb_ctl gnb_es to host A and host B respectively.

Assuming that host A and host B need to temporarily penetrate the intranet interconnection in two different LANs, the fastest way is to run gnb through lite mode. In lite mode, asymmetric encryption is not enabled, and only through passcode and The node id generates the encryption key, so the security will be much less modular than working with asymmetric encryption.

passcode is a 32-bit hexadecimal string with a length of 8 characters, which can be represented as 0xFFFFFFFF or FFFFFFFF, under a public index passcode is the same GNB node It is considered to be a node on the same virtual network. Please choose a passcode that will not be the same as other users as much as possible. Here, for the convenience of demonstration, the passcode is selected as 12345678, and the parameter **-p ** Used to specify the passcode to start the node. Do not use such a simple passcode in actual use, it may conflict with other users who also use 12345678 as passcode and cause communication failure.

Step 3: Start the first node

Execute with root on host A

gnb -n 1001 -I "120.76.206.113/9001" --multi-socket=on -p 12345678

After the startup is successful, execute ip addr on host A to see the GNB node IP

3: gnb_do:mtu 1280 qdisc fq_codel state UNKNOWN group default qlen 500
    link/none
    inet 10.1.0.1/16 scope global gnb_tun
       valid_lft forever preferred_lft forever
    inet6 64:ff9b::a01:1/96 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::402:c027:2cf:41f9/64 scope link stable-privacy
       valid_lft forever preferred_lft forever

Step 4: Start the second node

Execute with root on host B

gnb -n 1002 -I "120.76.206.113/9001" --multi-socket=on -p 12345678

After the startup is successful, execute ip addr on host B to see the GNB node IP

3: gnb_do:mtu 1280 qdisc fq_codel state UNKNOWN group default qlen 500
    link/none
    inet 10.1.0.2/16 scope global gnb_tun
       valid_lft forever preferred_lft forever
    inet6 64:ff9b::a01:2/96 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::a6cf:9f:e778:cf5d/64 scope link stable-privacy
       valid_lft forever preferred_lft forever

Step 5: Test GNB Node Interoperability

At this point, if host A and host B nat penetrate successfully and ensure that there is no firewall intervention on the host, they can ping each other's virtual ip.

Execute on host A

root @ hostA: ~ # ping 10.1.0.2
PING 10.1.0.2 (10.1.0.2) 56(84) bytes of data.
64 bytes from 10.1.0.2: icmp_seq=1 ttl=64 time=2.13 ms
64 bytes from 10.1.0.2: icmp_seq=2 ttl=64 time=2.18 ms
64 bytes from 10.1.0.2: icmp_seq=3 ttl=64 time=2.38 ms
64 bytes from 10.1.0.2: icmp_seq=4 ttl=64 time=2.31 ms
64 bytes from 10.1.0.2: icmp_seq=5 ttl=64 time=2.33 ms

Execute on host B

root @ hostA: ~ # ping 10.1.0.1
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=2.34 ms
64 bytes from 10.1.0.1: icmp_seq=2 ttl=64 time=1.88 ms
64 bytes from 10.1.0.1: icmp_seq=3 ttl=64 time=1.92 ms
64 bytes from 10.1.0.1: icmp_seq=4 ttl=64 time=2.61 ms
64 bytes from 10.1.0.1: icmp_seq=5 ttl=64 time=2.39 ms

The simplest use process of the above GNB lite mode, GNB lite mode has 5 built-in nodes, if you need more hosts to participate in the networking and use a more secure asymmetric encryption method to protect the data communication of GNB, please read the following documents carefully.

Deep understanding of GNB guidelines

The role of the index node of GNB is similar to the Tracker in the BT protocol, which is provided by some GNB network volunteers. In most cases, the index node only provides the address index for the hosts in the GNB network, and will not transfer data for the GNB node.

The forward node of GNB provided by some volunteers can perform data transfer for hosts that are temporarily unable to perform point-to-point communication in extreme cases, and the asymmetric data encryption between GNB hosts makes it impossible for the forward node to spy on the transferred data.

In extreme cases where peer-to-peer communication cannot be established, whether to transfer data through the public network forward node and which trusted forward node to use to transfer data depends entirely on the host owner's settings on the GNB node. In fact, even in an extremely complex network environment, GNB's superior link capability can establish virtual data links anytime, anywhere. GNB will even create multiple virtual links for hosts in the network, and choose the optimal speed path to send data packets.

Here are the available index nodes provided by volunteers

i|0|101.32.178.3|9001

Limitations of GNB

GNB does not support Classless Inter-Domain Routing (CIDR), only supports Class A, B, C networks;
GNB does not forward IP frames of Default route. In host to net and net to net modes, GNB can forward data for specific subnets, but does not support full traffic forwarding;
The IPV6 of GNB cannot work normally under Windows platform;
The work of GNB using virtual network card realizes Layer 3 switching in TUN mode, and does not support Layer 2 switching if it does not support TAP mode;

GNB related documentation

GNB on OpenWRT

GNB supports the OpenWRT platform and needs to be compiled by the user.

GNB on Linux distributions

The systemd script was made by Jin Buguo for the GNB project

The atzlinux project has made a deb format software package under Linux for the GNB project, and contributed it to become the official Debian software package.

You may install opengnb on Debian 12 (bookworm) :

apt install opengnb

Arch Linux

The AUR package of Arch Linux was made by taotieren for the GNB project. The installation method is as follows

# install distribution
yay -Sy opengnb
# Install the development version
yay -Sy opengnb-git

For details, please visit https://aur.archlinux.org/packages/opengnb/

https://aur.archlinux.org/packages/opengnb-git/

Download the compiled and released version of gnb on each platform

gnb_udp_over_tcp is a service developed for GNB that forwards UDP packets through tcp link, and can also forward data for other services based on UDP protocol.

Disclaimer