- PU-8 (SCPH100X) (untested)
- PU-18 (SCPH55XX)
- Audio CD image
- UNIROM image
- Some games MAY load
- Assemble PCB
- Solder Xstation QSB (including pin lifting)
- Double / triple check each connection, from the alt-point to the FFC connector point on the picostation board, PCB pinout
- Compile code, or use latest release
- Upload picostation.uf2 to your Raspberry Pi Pico (press Bootsel while you plug usb cable)
- Drop your bin/cue files on your SD Card (named UNIROM.bin / UNIROM.cue | UNIROM.cue must point to UNIROM.bin)
- Insert SD Card into PCB
- Boot your PS1, Enjoy
- For the moment, Game/app loading is not consistent, you'll need to try several times
- If using an out of region bin/cue, you may need to use freepsxboot to bypass the region check
- PCB: https://github.com/paulocode/picostation_pcb
- FAQ: https://github.com/paulocode/picostation_faq
- Slow Solder Board (SSB) solder points / checking connection: https://mmmonkey.co.uk/xstation-sony-playstation-install-notes-and-pinout/
- How to compile (Windows): https://shawnhymel.com/2096/how-to-set-up-raspberry-pi-pico-c-c-toolchain-on-windows-with-vs-code/
- PCB pinout:
