gonium/gosdm630

Issues

• Building on RPi fails

  #140 opened 5 years ago by suelberg
  2

• ModBus Adaptor error rate

  #130 opened 5 years ago by art0
  2

• precompiled 0.7.0 and 0.6.0 are the same (=0.6.09

  #132 opened 6 years ago by RubberDucky007
  2

• Divide by zero panic

  #138 opened 6 years ago by andig
  0

• GPIO to switch between RX/TX

  #133 opened 6 years ago by 3s1d
  2

• Wrong values with sdm530

  #131 opened 6 years ago by RubberDucky007
  9

• raspi cannot read sdm when rs485 is 1st serial

  #28 opened 7 years ago by MatzeJoerling
  3

• Failed to connect: no such file or directory

  #128 opened 6 years ago by dimagoltsman
  5

• SMA Current not properly decoded

  #126 opened 6 years ago by andig
  0

• Add more DVG4013 features

  #62 opened 6 years ago by andig
  4

• Connect few meters to one dongle

  #114 opened 6 years ago by poratnir1
  6

• Duplication of ID in Web API

  #7 opened 6 years ago by gonium
  3

• Problem building from source

  #111 opened 6 years ago by art0
  7

• Unpublish homie meters/nodes/properties when closing

  #101 opened 6 years ago by andig
  1

• Add SDM120 meter type

  #37 opened 7 years ago by andig
  7

• Binary =/= 0.7.0

  #92 opened 6 years ago by J-A-U
  1

• Implement MQTT discovery

  #85 opened 6 years ago by andig
  1

• Enable travis build

  #26 opened 6 years ago by andig
  1

• [RFC] performance improvements

  #46 opened 6 years ago by andig
  2

• [RFC] refactor meter opcode definitions

  #41 opened 6 years ago by andig
  2

• Device 9 failed to respond - retry attempt 1 of 5

  #29 opened 6 years ago by MatzeJoerling
  3

• RS485 Board

  #30 opened 6 years ago by preussal
  2

• Need testers for Saia Burgess ALE3 implementation

  #49 opened 6 years ago by andig
  1

• Release 0.6.0 mqtt disconnected

  #59 opened 6 years ago by timtimsson
  9

• detect broken on master

  #58 opened 6 years ago by andig
  1

• Add new precompiled release

  #55 opened 6 years ago by dimagoltsman
  22

• mqtt Power(Watt) total and 1messageblock every 30sec?

  #45 opened 6 years ago by timtimsson
  4

• Run on the same machine with Apache web server

  #42 opened 6 years ago by x16
  2

• since latest commit realtime view not working anymore

  #18 opened 7 years ago by holli73
  3

• Frequency logging

  #19 opened 7 years ago by Trickx
  2

• Firehose: Change longpolling API to websockets

  #13 opened 7 years ago by gonium
  2

• SDM630: strange behaviour of /minuteavg vs /last

  #16 opened 7 years ago by andig
  0

• High load on raspberry

  #20 opened 7 years ago by andig
  8

• SDM630: timestamp of last change?

  #17 opened 7 years ago by andig
  1

• Output formatting broken?

  #15 opened 7 years ago by andig
  1

• Building GOSDM630: fs.go:35: undefined: sort.Slice

  #21 opened 7 years ago by aerno
  10

• Installation fails on Raspi / Debian stretch

  #14 opened 7 years ago by andig
  1

• Guidelines for contributions

  #8 opened 7 years ago by gonium
  1

• Control abort conditions

  #10 opened 7 years ago by TheCount
  3

• Support for Janitza B-Series Smart meter

  #11 opened 7 years ago by gonium
  3

• Web frontend looses values if two browsers are open

  #12 opened 7 years ago by gonium
  0

• reports zero values on startup

  #9 opened 7 years ago by TheCount
  1

• Tool for MODBUS scanning

  #2 opened 7 years ago by gonium
  3

• Makefile test target

  #4 opened 8 years ago by TheCount
  0

• GB Build Tool install error on RPi 3

  #1 opened 8 years ago by fahimmac
  1