This repository enables building resin.io for various devices.
- meta-resin-common : layer which contains common recipes for all our supported platforms.
- meta-resin-* : layers which contain recipes specific to yocto versions.
- other files : README, COPYING, etc.
meta-resin
version is kept in DISTRO_VERSION
variable. resin-<board>
version is kept in the file called VERSION located in the root of the resin-<board>
repository and read in the build as variable HOSTOS_VERSION.
- The version of
meta-resin
is in the format is 3 numbers separated by a dot. The patch number can have abeta
label. e.g. 1.2.3, 1.2.3-beta1, 2.0.0-beta1. - The version of
resin-<board>
is constructed by appending to themeta-resin
version arev
label. This will have the semantics of a board revision which adapts a specificmeta-resin
version for a targeted board. For example a meta-resin 1.2.3 can go through 3 board revisions at the end of which the final version will be 1.2.3+rev3 . - The first
resin-board
release based on a specificmeta-resin
release X.Y.Z, will be X.Y.Z+rev1 . Example: the firstresin-board
version based onmeta-resin
1.2.3 will be 1.2.3+rev1 . - When updating
meta-resin
version inresin-board
, the revision will reset to 1. Ex: 1.2.3+rev4 will be updated to 1.2.4+rev1 . - Note that the final OS version is NOT based on semver specification so parsing of such a version needs to be handled in a custom way.
- e.g. For
meta-resin
release 1.2.3 there can beresin-<board>
releases 1.2.3+revX
. - e.g. For
meta-resin
release 2.0.0-beta0 there can beresin-<board>
releases 2.0.0-beta0+revX
.
We define host OS version as the resin-<board>
version and we use this version as HOSTOS_VERSION.
Before bitbake-ing with meta-resin support, a few flags can be changed in the conf/local.conf from the build directory. Editing of local.conf is to be done after source-ing. See below for explanation on such build flags.
The DEVELOPMENT_IMAGE variable gets injected into DISTRO_FEATURES. If DEVELOPMENT_IMAGE = "1" then 'development-image' distro feature is added. Based on this, recipes can decide what development specific changes are needed. By default DEVELOPMENT_IMAGE = "0" which corresponds to a normal (non-development) build (development-image won't be appended to DISTRO_FEATURE). If user wants a build which creates development images (to use the serial console for example), DEVELOPMENT_IMAGE = "1" needs to be added to local.conf.
To make it short:
- If DEVELOPMENT_IMAGE is not present in your local.conf or it is not "1" : Non-development images will be generated (default behavior)
- If DEVELOPMENT_IMAGE is defined local.conf and its value is "1" : Development images will be generated
In order to generate update resin host OS bundles, edit the build's local.conf adding:
RESINHUP = "yes"
By default resin uses NetworkManager on host OS to provide connectivity. If you want to change and use other providers, list your packages using NETWORK_MANAGER_PACKAGES. You can add this variable to local.conf. Here is an example:
NETWORK_MANAGER_PACKAGES = "mynetworkmanager mynetworkmanager-client"
We configure all of our initial images to produce a resin logo at boot, shutdown or reboot. But we encourage any user to go and replace that logo with their own. All you have to do is replace the splash/resin-logo.png file that you will find in the first partition of our images (boot partition) with your own image. NOTE: As it currently stands plymouth expects the image to be named resin-logo.png.
We currently distinguish two types of builds:
- builds that are connectable to resin by including all the software bits needed for communication with resin infrastructure
- builds that are not connectable to resin and are only meant for testing docker and other resinOS features on supported boards
The switch for these types is done based on a build variable RESIN_CONNECTABLE
which by default is currently set (=1).
In this case, docker-resin-supervisor-disk will be used as a docker-disk provider. All the needed services for connecting the device to resin will be installed (systemd services, VPN configuration etc.). By default the systemd services which are part of communicating to resin are enabled. This default behavior can be customized using RESIN_CONNECTABLE_ENABLE_SERVICES
build variable.
As well, by default, the docker resin-supervisor image will be preloaded in the Data partition. This behavior can be modified using TARGET_REPOSITORY/TARGET_TAG build variables. This leaves the possibility of creating a build without provisioning the supervisor image or creating one with all the supervisor services but with a custom image. TARGET_REPOSITORY/TARGET_TAG are decribed below.
Example: having a connectable image with services enabled and supervisor docker image preloaded - nothing to be done to build's local.conf
as these imply default values of all the variables.
Example: having a connectable image with services disabled and supervisor docker image preloaded - add/set RESIN_CONNECTABLE_ENABLE_SERVICES = "0"
to build's local.conf
.
Example: having a connectable image with services disabled and no docker image preloaded - add/set RESIN_CONNECTABLE_ENABLE_SERVICES = "0"
, TARGET_REPOSITORY = ""
and TARGET_TAG = ""
to build's local.conf
.
Example: having a connectable image with services disabled and custom docker image preloaded - add/set RESIN_CONNECTABLE_ENABLE_SERVICES = "0"
, TARGET_REPOSITORY = "mycustomimage"
and TARGET_TAG = "1.0"
to build's local.conf
.
Connectable images will have a tool for managing the resin services installed on the target called resin-connectable
. Check help message by running resin-connectable -h
for more information.
In this case, docker-custom-disk will be used as a docker-disk provider. All the services and software bits responsible for communicating with resin infrastructure will not be installed. In this case RESIN_CONNECTABLE_ENABLE_SERVICES
has no effect on the build as it only applies for connectable builds.
Without any other configuration, the build will leave the Data partition without any image preloaded. In addition to this, two other variables can be used to inject a specific dockerhub image:
- TARGET_REPOSITORY - the image name wanted to be injected
- TARGET_TAG - the image tag wanted to be injected. If not defined it will default to
latest
. Otherwise will use the specified value.
Example: having a non-connectable image without any docker image preloaded - add/set RESIN_CONNECTABLE="0"
to build's local.conf
.
Example: having a non-connectable image with ubuntu:latest docker image preloaded - add/set RESIN_CONNECTABLE = "0"
and TARGET_REPOSITORY = "ubuntu"
to build's local.conf
.
Example: having a non-connectable image with ubuntu:15:10 docker image preloaded - add/set RESIN_CONNECTABLE = "0"
, TARGET_REPOSITORY = "ubuntu"
and TARGET_TAG = "15.04"
to build's local.conf
.
Hint: Modifing any of the TARGET_* variables, will retrigger the generation of the Data partition without any issues but, if RESIN_CONNECTABLE
is changed in a working build (not one from scatch), the user will need to cleansstate the docker-image providers issuing a command similar to bitbake docker-custom-disk -c cleansstate ; bitbake docker-resin-supervisor-disk -c cleansstate
. Failing to do so, while changing RESIN_CONNECTABLE
in a working build, will result in a build error similar to:
ERROR: The recipe docker-custom-disk is trying to install files into a shared area when those files already exist. Those files and their manifest location are: ???/build/tmp/sysroots/beaglebone/sysroot-providers/docker-disk Matched in manifest-beaglebone-docker-resin-supervisor-disk.populate_sysroot Please verify which recipe should provide the above files. The build has stopped as continuing in this scenario WILL break things, if not now, possibly in the future (we've seen builds fail several months later). If the system knew how to recover from this automatically it would however there are several different scenarios which can result in this and we don't know which one this is. It may be you have switched providers of something like virtual/kernel (e.g. from linux-yocto t o linux-yocto-dev), in that case you need to execute the clean task for both recipes and it will resolve this error. It may be you changed DISTRO_FEATURES from systemd to udev or vice versa. Cleaning those recipe s should again resolve this error however switching DISTRO_FEATURES on an existing build directory is not supported, you should really clean out tmp and rebuild (reusing sstate should be safe). It could be the ov erlapping files detected are harmless in which case adding them to SSTATE_DUPWHITELIST may be the correct solution. It could also be your build is including two different conflicting versions of things (e.g. blue z 4 and bluez 5 and the correct solution for that would be to resolve the conflict. If in doubt, please ask on the mailing list, sharing the error and filelist above. ERROR: If the above message is too much, the simpler version is you're advised to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things in most (but not all) cases.
By the default the build system will set all the bits needed for the docker to be able to use the aufs
storage driver. This can be changed by defining DOCKER_STORAGE
in your local.conf. It supports aufs
and overlay2
.
We currently tested and provide explicit support for the following WiFi adapters:
- bcm43143 based adapters
- Example: Official RPI WiFi adapter link
To contribute send github pull requests targeting this repository.
Please refer to: Yocto Contribution Guidelines and try to use the commit log format as stated there. Example:
test.bb: I added a test
[Issue #01]
I'm going to explain here what my commit does in a way that history
would be useful.
Signed-off-by: Joe Developer <joe.developer@example.com>
We take advantage of a change log file to keep track of what was changed in a specific version. We used to handle that file manually by adding entries to it at every pull request. In order to avoid racing issues when pushing multiple PRs, we started to use versionist which will generate the change log at every release. This tool uses two footers from commit log: Change-type
and Changelog-entry
. Each PR needs to have at least one commit which will specify both of these two commit log footers. In this way, when a new release is handled, the next version will be computed based on Change-type
and the entries in the change log file will be generated based on Changelog-entry
.
In the common case where each PR addresses one specific task (issue, bug, feature etc.) the PR will contain a commit which will include Change-type
and Changelog-entry
in its commit log. Usually, but not necessary, this commit is the last one in the branch.
Change-type
is mandatory and, because meta-resin follows semver, can take one of the following values: patch, minor or major. Changelog-entry
defaults to the subject line.
- Supervisor fails with a log similar to:
Step 3 : RUN chmod 700 /entry.sh
---> Running in 445fe69866f9
operation not supported
This is probably because of a docker bug where, if you update kernel and don't reboot, docker gets confused. The fix is to reboot your system. More info: http://stackoverflow.com/questions/29546388/getting-an-operation-not-supported-error-when-trying-to-run-something-while-bu
The behaviour of resinOS can be configured by setting the following keys in the config.json file in the boot partition. This configuration file is also used by the supervisor.
String. The configured hostname of this device, otherwise the UUID is used.
Boolean. Enable or disable persistent logging on this device.
String. The country in which the device is operating. This is used for setting with WiFi regulatory domain.
String. A space-separated list of NTP servers to use for time synchronization. Defaults to resinio.pool.ntp.org servers.
String. A space-separated list of preferred DNS servers to use for name resolution. Falls back to DHCP provided servers and Google DNS.
The following Yocto versions are supported:
- Morty (2.2)
- TESTED
- Krogoth (2.1)
- TESTED
- Jethro (2.0)
- TESTED
- Fido (1.8)
- UNTESTED