Issues
- 1
-
#62 opened by Destroyarr - 0
allow JTAGULATOR to read inputs up to 5V
#70 opened by algila - 3
USB Connector Obsolete
#67 opened by miller-craig - 1
Unable to update to latest version
#69 opened by camsmithsdev8090 - 2
- 5
Cant load firmware 1.11 on JTAGulator
#46 opened by whoot - 5
is there any way to debug why uart passthrough is not outputting when doing tx rx connected together test(for echo test)?
#61 opened by kocoman1 - 1
is there some schemaitcs I can look to repair my UART issue? thx https://github.com/grandideastudio/jtagulator/issues/61
#66 opened by kocoman1 - 3
jtagulator locked
#65 opened by hassan-salloum - 2
UART Passthrough at 921600 baud rate
#64 opened by santiac89 - 0
Bypass scan not worked in the Raspberry model
#60 opened by TAPADYUTIBARAL - 3
IDcode / Bypass scan : No results ( RPI3 )
#27 opened by CSamyR - 1
GPIO.W producing weird voltage
#59 opened by STMRabbit - 3
- 1
JTAGulator light stays red even after flashing new eeprom, no serial output
#57 opened by joshterrill - 6
Not detecting any devices
#56 opened by nataneliezer - 2
- 5
Scans aborting by default without waiting for the spacebar or any other key
#54 opened by ramyapandian1987 - 2
- 6
setting up jtagulator for jtag
#51 opened by dutycyc - 1
CC26X0 - No target device(s) found
#52 opened by daniel-rome - 2
Is there a Better USB Connector I Can Use?
#50 opened by Eddiiie - 3
PulseView cannot Scan the Device
#48 opened by Droid-MAX - 1
- 15
- 0
Fail to detect JTAG Interface.
#45 opened by TheMadYak - 1
jtagulator pin identification problem
#44 opened by yum7777 - 1
TRST pin Question
#43 opened by yum7777 - 2
vcc pin identification
#42 opened by yum7777 - 33
No target device(s) found!
#24 opened by twisted89 - 4
- 14
- 2
- 5
cJTAG support
#13 opened by hei5enbrg - 3
Feature request: SWD & cJTAG detection
#15 opened by ikarus23 - 1
Baud rate confusion
#35 opened by BG7YWL - 7
UART Search String Limited to 4 Hex Bytes
#34 opened by digitalentropy - 1
Baudrate "index out of range"
#33 opened by whoot - 9
JTAGulator Stopped Responding
#29 opened by lucky-aptiv - 3
OE Pin not driven high?
#31 opened by TheFuzzyGiggler - 2
JTAGulator interfaced with a Raspberry Pi
#26 opened by CyberTecky - 2
- 5
Perhaps UART Buffering Problem ?
#23 opened by shuber1 - 1
How to deal with pull up/downs?
#21 opened by 0ff - 5
Firmware failing to write using PropellerIDE macOS
#20 opened by 0xff7 - 3
Unable to find JTAG pins
#19 opened by jgeorge1 - 14
Valid Baud Rates "Out of range"
#18 opened by ahp95 - 1
Level-shifting in Jtagulator
#17 opened by AlixAbbasi - 4
BYPASS scan complete! Nothing found
#14 opened by maxy1 - 2
VADJ no use?
#11 opened by cederom