3dprints

These are pre-sliced gcode files for things I've made with my Monoprice Maker Select.

This way I can come back and print them with the exact same settings easily.

Office Things

Headphone holder

This is my heavy duty headphone holder, modified to accept a USB headset cable.

heavy_duty_headphone_holder.gcode - 16h headphone_holder_bolt.gcode - 3h

Fidget Things

Bolts

These are large nuts and bolts to play with

knurling_bolt_50mm - 2h 17m knurling_nut - 1h 30m rounded_knurling_bolt_40mm - 2h 10m rounded_knurling_nut - 1h 40m

Rings

These are interlocking rings that can rotate in any direction

solid_rings_fidget - 4h 10m

Spinner integrated bearings

These are fidget spinners with integrated bearings, so they are a single piece with no metal bearings needed.

The flat one has finger pads that are level with the body, not inset, so it prints better without as much overhang. It's also at .2mm layer heights instead of 0.1mm awfor faster printing.

fidget_spinner - 5h 5m fidget_spinner_flat - 3h 1m