grblHAL/core

Issues

• MPG mode don't start

  #636 opened a month ago by MrKapim
  2

• Building firmware for RP2040 fails

  #632 opened a month ago by ahmadmadary
  1

• Cant use ESP32 driver when wifi is enabled

  #634 opened a month ago by DLR3D
  5

• M64/M65 executed immediately when parsed, not planned

  #633 opened a month ago by skasti
  2

• when engraving an image in stucki mode the laser does not turn off during overscanning

  #630 opened a month ago by distebia
  0

• Maybe a bug around door and parking

  #610 opened 3 months ago by Klippert
  5

• Non-smooth motion while engraving

  #570 opened 5 months ago by pimsierhuis
  14

• Controllo motore Nidec con mks dlc32 e CLK (no PWM)

  #550 opened 2 months ago by distebia
  11

• communication with stm32f411re nucleo board

  #616 opened 3 months ago by Sreejasailu
  9

• Z moving when not asked

  #622 opened 2 months ago by Toutoune86
  2

• A axis rotational issues

  #618 opened 2 months ago by Fastbass
  12

• Possibility to impose a speed different from the maximum speed of the translation movement in G0 movements

  #620 opened 2 months ago by Deltaplc
  0

• Spindle is switched off when speed is 0

  #617 opened 3 months ago by Deltaplc
  1

• Trying to home a second time causes a crash

  #609 opened 3 months ago by ramin-afshar
  4

• M62P0 AUXIO

  #600 opened 3 months ago by jeefdumbo
  0

• Unexpected application of offset to macro parameters?

  #594 opened 3 months ago by skasti
  1

• SKR PRO 1.2 TMC5160 X axis not working

  #604 opened 3 months ago by brokenpotatoes
  6

• MACROS Can multiple commands be executed？

  #605 opened 3 months ago by auxp
  4

• Manual Tool Change

  #601 opened 3 months ago by SpikZASA
  2

• Unexpected Behaviour when Turning On/Off Multiple Spindles

  #598 opened 3 months ago by engigeer
  4

• Macro calling other macros issues

  #582 opened 4 months ago by skasti
  16

• Setting $14 to any value freezes STM32F103RC controller

  #588 opened 4 months ago by macbef
  13

• Request for assigned settings for toolsetter moves

  #542 opened 4 months ago by LoganFraser
  2

• Breaks in received message

  #580 opened 4 months ago by karoria
  3

• Unexpected Spindle Linearization Treatment of PWM/rpm Min Values

  #555 opened 6 months ago by engigeer
  1

• About Keyboard Plugin

  #558 opened 6 months ago by auxp
  1

• Teensy 4.1 Mysterious dropped or added characters in gcode over USB

  #549 opened 6 months ago by clashoftornados
  7

• I want to try rigid tapping on my CNC mill what should I do?

  #554 opened 6 months ago by karoria
  1

• G2 that triggers an ARC_ANGULAR_TRAVEL_EPSILON related calculation error

  #547 opened 6 months ago by bjerrep
  4

• When homing is ongoing real-time report requests are ignored？

  #551 opened 6 months ago by attying
  3

• can't get rid of "error:79" on first dry run

  #548 opened 6 months ago by wolfgangr
  1

• set machine origin to 0, or bit3, not working for $22

  #512 opened 6 months ago by terjeio
  5

• MKS TinyBee problem

  #537 opened 7 months ago by krzychu521
  1

• Macro Issue that I can not figure out.

  #504 opened 7 months ago by rvalotta
  6

• Typo in settings.c

  #538 opened 7 months ago by andrewmarles
  1

• $150 - $153 does not work on SKR Pico

  #535 opened 7 months ago by JivaroFAD
  2

• Web Builder is not available in China

  #533 opened 7 months ago by zhuyuwu110
  2

• Are the all inputs like e-stp, homming, probe, pins pullup ?

  #534 opened 7 months ago by RDS356
  1

• Lathe Diameter/Radius offset report issue

  #500 opened 7 months ago by nickshl
  1

• Experiencing issues with ESP32 Blackbox Build

  #521 opened 7 months ago by rvalotta
  10

• Syntax error / typo in ngc_expr.c

  #527 opened 7 months ago by MitchBradley
  3

• Delta Kinematics: Y axis moves are not executing correctly - Motor duplication?

  #526 opened 7 months ago by iLoveAndyBaker
  1

• How to limit the maximum output pulse frequency to prevent the user from setting an excessively high pulse rate that could cause grblHAL to crash?

  #522 opened 8 months ago by hanke-cnc
  1

• Not correctly reporting coordinates?

  #517 opened 8 months ago by tcurdt
  4

• octopus max STM32H723

  #514 opened 8 months ago by T4KUUY4
  1

• Is the data in the driver capabilities list dependably up to date?

  #510 opened 8 months ago by imechura
  2

• regression in websocket init_message caused by commit a912ce4

  #509 opened 8 months ago by richpletcher
  1

• I noticed that the current Setting_AxisStepsPerMM setting has 5 zeros after the decimal point. Is there any reason for doing this?

  #508 opened 8 months ago by hanke-cnc
  2

• kinda vfd support

  #501 opened 9 months ago by thirstyone
  3

• Joggin unavailable for many commands

  #498 opened 9 months ago by nickshl
  3