ESP32 C6 matter lighting bin file. It is work with Google Nest Hub.
After downloaded 1.4G esp-idf and 17G esp-matter, I done the bin file.
Just for testing.
You can flash these bin file with windows tools ( flash_download_tool_3.9.5_0.zip ) .
0x0 build/bootloader/bootloader.bin
0xc000 build/partition_table/partition-table.bin
0x1d000 build/ota_data_initial.bin
0x20000 build/light.bin
PIN is 34970112332
The PID is set in sdkconfig / CONFIG_DEVICE_PRODUCT_ID
Default, both VID/PID is 0xFFF1 and 0X8000
Need to setting google developer console for google home and Google Nest Hub.
Then you can control ESP32 C6 over voice.
gpio#1, blue light, as contorl for relay/SSR.
gpio#18, as button to on/off plug, short to GND as press button.
matter device factoryreset
color light
dimmer light
onoff light
plug, end of google nest hub
plug, end of google nest hub
plug, end of phone
plug, end of phone
