Issues
- 0
Brand new HackRF One out of box failure
#1480 opened by Manishaalk - 2
"No HackRF boards found"
#1478 opened by billmilosz - 0
lesson1 not running
#1477 opened by whaleshark88 - 0
Only I or Q channel carrier wave transmit?
#1476 opened by luoGanda - 1
- 8
I broke my HackRF
#1475 opened by LegsAJimbo - 0
Hackrf what does baseband_filter_bw_hz do?
#1471 opened by smileyrekiere - 1
Opera Cake
#1437 opened by shugaj - 0
Use HackRF to run Krakensdr
#1470 opened by michalisk13 - 2
what caused hackrf_transfer errors?
#1467 opened by dudelaksdfjlkaz0102 - 1
SD Card Issues with Portapack H2
#1468 opened by Mike511986 - 5
- 5
Why hackrf_sweep use INTERLEAVED mode and discards data from a center of filter?
#1460 opened by kubrack - 2
Add USB-c (pcb already modified)
#1465 opened by ICantMakeThings - 1
osmocom_fft error:"AttributeError: 'gnuradio.qtgui.qtgui_python.freq_sink_c' object has no attribute 'pyqwidget'. Did you mean: 'qwidget'?
#1454 opened by HZX0748 - 3
Antenna working frequency!
#1457 opened by FadySamann - 1
Digitization of the signal
#1451 opened by Sentos777 - 3
- 3
- 1
Sync hack rf one
#1427 opened by AlMasz2837 - 2
Replacement of TPS62410 Buck converter
#1463 opened by anxzik - 0
Add explanation of hardware revisions to documentation
#1448 opened by miek - 5
RF Scanning on HackRF One
#1447 opened by greghains - 4
- 3
"hackrf_close() failed: Input/Output Error (-1000)"
#1462 opened by Ross966 - 6
Is the sampling frequency being generated by the same oscillator as the carrier frequency?
#1416 opened by radio-satellites - 9
PPTC for LNA protection?
#1458 opened by Botox200 - 1
Connot get into updating HRFh2+
#1446 opened by RXANDR1 - 1
SoapyHackRF how to transmit buffers smaller then 262144 and buffers greater then 262144
#1444 opened by smileyrekiere - 1
hackrf_biast for Windows
#1455 opened by Totoche95 - 4
Second Signal with hackrf_transfer
#1410 opened by Klammraute - 6
Updated instructions to compile on Windows
#1413 opened by raffaeler - 2
hackrf_sweep hangs being run in cycle
#1414 opened by egm108 - 1
MiB wrong conversion in hackrf_transfer.c
#1425 opened by signalius - 2
A request about waveform or code defined transceiver lib for libhackrf update
#1426 opened by PatrickDowS - 0
3D Models (CAD) for the Official Case/Enclosure
#1443 opened by NoSuck - 2
1.4.2 to 2.0.1 issues
#1452 opened by discoriot - 2
hackrf.h ### Example TX code utilizing the transfer and flush callbacks. Needed to change line to void flush_callback(void * transfer, int success) {
#1439 opened by smileyrekiere - 1
hackrf_transfer: First TX/RX after USB connection / reset does not contain any signal
#1438 opened by 5830ification - 1
hackrf_info
#1429 opened by ejweng0428 - 1
A webserver
#1441 opened by Dr34mChas3r - 0
- 2
Hackrf frequency Limits Tx/Rx
#1435 opened by smileyrekiere - 3
hackrf_info , SopySDRUtil, gr-soapy different results for lisusb_claim_interface
#1433 opened by smileyrekiere - 3
Rev9 Hardware freq setting
#1431 opened by 8uzeef - 1
osmocom-fft and gnuradio-companion python issue
#1421 opened by davidwowa - 7
Problem Updating to release 2024.02.1
#1422 opened by AlexLandherr - 2
Hackrf_sweep error at ranges above 160mhz
#1428 opened by Klammraute - 4
Installed TCXO but still read from register 0 0x51
#1417 opened by NazariyZ - 5