gregersrygg/nrfcredstore-test

nrfcredstore

nrfcredstore is a command line tool that simplifies managing credentials stored in Nordic Semiconductor modems, like the nRF9160. The typical use case of nrfcredstore is to automate the provisioning of cloud certificates that are stored securely in the modem.

Install

Run the following command to use this package as a dependency:

pip3 install nrfcredstore

Requirements

For the device to respond to AT commands, the firmware on the device must have at_client enabled. This can be done by setting CONFIG_AT_HOST_LIBRARY=y. The nRF9160: AT Client sample can also be used, and the nRF9160 DK application and modem firmware download contains a pre-built firmware.

Command Line Interface

usage: nrfcredstore [-h] [--baudrate BAUDRATE] [--timeout TIMEOUT] dev {list,write,delete,generate} ...

Manage certificates stored in a cellular modem.

positional arguments:
  dev                   Serial device used to communicate with the modem.

options:
  -h, --help            show this help message and exit
  --baudrate BAUDRATE   Serial baudrate
  --timeout TIMEOUT     Serial communication timeout in seconds

subcommands:
  {list,write,delete,generate}
                        Certificate related commands
    list                List all keys stored in the modem
    write               Write key/cert to a secure tag
    delete              Delete value from a secure tag
    generate            Generate private key

list subcommand

List keys stored in the modem.

usage: nrfcredstore [--baudrate BAUDRATE] [--timeout TIMEOUT] dev list [--tag SECURE_TAG [--type KEY_TYPE]]

example

$ nrfcredstore /dev/tty.usbmodem0009600000001 list --tag 123
Secure tag   Key type           SHA
123          ROOT_CA_CERT       XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
123          CLIENT_CERT        XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
123          CLIENT_KEY         XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

write subcommand

Write key/cert to a secure tag. KEY_TYPE must be either ROOT_CA_CERT, CLIENT_CERT, CLIENT_KEY, or PSK.

usage: nrfcredstore [--baudrate BAUDRATE] [--timeout TIMEOUT] dev write SECURE_TAG KEY_TYPE FILENAME

example

$ nrfcredstore /dev/tty.usbmodem0009600000001 write 123 ROOT_CA_CERT root-ca.pem

delete subcommand

Delete value from a secure tag.

usage: nrfcredstore [--baudrate BAUDRATE] [--timeout TIMEOUT] dev delete SECURE_TAG KEY_TYPE

example

$ nrfcredstore /dev/tty.usbmodem0009600000001 delete 123 ROOT_CA_CERT

generate subcommand

Generate a private key in the modem and output a certificate signing request.

usage: nrfcredstore [--baudrate BAUDRATE] [--timeout TIMEOUT] dev generate SECURE_TAG FILENAME

example

$ nrfcredstore /dev/tty.usbmodem0009600000001 generate 123 device_cert.der

# Convert DER to CSR
$ openssl req -pubkey -in device_cert.der -inform DER > device_cert.csr

Development installation

For development mode, you need poetry:

curl -sSL https://install.python-poetry.org | python3 -

Install package dependencies, development dependencies, and the nrfcredstore itself into poetry's internal virtual environment:

poetry install

Test

Running the tests depends on a development installation.

poetry run pytest

Check coverage

poetry run pytest --cov=. tests