/bvh

A modern C++ BVH construction and traversal library

Primary LanguageC++MIT LicenseMIT

bvh Build Status

This is a modern C++17 header-only BVH library optimized for ray-tracing. Traversal and construction routines support different primitive types. The design is such that the BVH only holds nodes, no primitive data. There is no hardware- or platform-specific intrinsic used. Parallelization is done using OpenMP. There is no dependency except the C++ standard library.

Example rendering generated by a path tracer using this library (Scene by Blend Swap user MaTTeSr, available here, distributed under CC-BY 3.0)

Performance

Here is a comparison of this library with other alternatives (Embree, Fast-BVH, nanort):

Comparison of this library vs. other alternatives

These numbers were obtained when rendering the image above, with a path tracing renderer using single-ray traversal, on an AMD Ryzen Threadripper 2950X. They show that this library can get very close to Embree, and be orders of magnitude faster than alternatives, all while being portable and not relying on SIMD intrinsics.

Detailed Description

Since there are various algorithms for BVH traversal and construction, this library provides several options that can be used to target real-time, interactive, or offline rendering.

Construction Algorithms

This library contains several construction algorithms, all parallelized using OpenMP.

  • bvh::BinnedSahBuilder: Top-down builder using binning to compute the SAH (see On fast Construction of SAH-based Bounding Volume Hierarchies, by I. Wald). Relatively fast and produces medium- to high-quality trees. Can be configured by setting the number of bins.
  • bvh::SweepSahBuilder: Top-down builder that sorts primitives on all axes and sweeps them to find the split with the lowest SAH cost. Relatively slow but produces high-quality trees.
  • bvh::LocallyOrderedClusteringBuilder: Bottom-up builder that produces trees by sorting primitives on a Morton curve and performing a local search to merge them into nodes (see Parallel Locally-Ordered Clustering for Bounding Volume Hierarchy Construction, by D. Meister and J. Bittner). Very fast algorithm that produces medium- to high-quality trees (if bvh::LeafCollapser is used). The search radius can be configured to change the quality/speed ratio. Additionally, the integer type used to compute Morton codes can also be changed when more precision is required.
  • bvh::LinearBvhBuilder: Bottom-up LBVH builder. Very fast and produces low-quality trees. Not substantially faster than bvh::LocallyOrderedClusteringBuilder, particularly when the search radius of that algorithm is small. Since the BVHs built by this algorithm are significantly worse than those produced by other algorithms, do not use this builder unless you absolutely need the fastest construction algorithm.
  • bvh::SpatialSplitBvhBuilder: Top-down SBVH builder that splits primitives to minimize overlap between nodes. Based on the article Spatial Splits in Bounding Volume Hierarchies, by M. Stich et al. Produces very high-quality trees, at the cost of very slow BVH builds. Use for offline rendering. Although it is possible to disable spatial splits and only perform object splits with this builder, prefer bvh::SweepSahBuilder for this as, unlike this builder, it does not need to sort references at every step.

Those algorithms only require a bounding box and center for each primitive, except for bvh::SpatialSplitBvhBuilder, which needs a way to split individual primitives.

Optimization/Splitting/Refitting Algorithms

Additionally, the BVH structure can be further improved by running post-build optimizations, or pre-build triangle splitting.

  • bvh::ParallelReinsertionOptimizer: An optimization that tries to re-insert BVH nodes in a way that minimizes the SAH (see Parallel Reinsertion for Bounding Volume Hierarchy Optimization, by D. Meister and J. Bittner). This can lead up to a 20% improvement in trace performance, at the cost of longer build times.
  • bvh::HeuristicPrimitiveSplitter: A pre-splitting algorithm that splits primitives at regular positions, inspired by Fast Parallel Construction of High-Quality Bounding Volume Hierarchies, by T. Karras and T. Aila. Works well in combination with bvh::LinearBvhBuilder, but may decrease performance for other builders on some scenes. Takes a budget of primitives to split, and distributes it to each primitive based on a priority heuristic.
  • bvh::NodeLayoutOptimizer: A cheap post-build optimization that reorders the nodes of the BVH in memory in such a way that nodes that have a high probability of being hit are likely to already be in the cache. This optimization is only really helpful when traversing incoherent rays, but can in that case increase performance by up to 10%.
  • bvh::LeafCollapser: A post-build optimization that collapses the leaves of the BVH when this is beneficial to the SAH cost of the tree. This optimization is only relevant for bottom-up builders like bvh::LinearBvhBuilder or bvh::LocallyOrderedClusteringBuilder, because top-down builders already have a stopping criterion that prevents creating leaves that would be detrimental to the SAH cost of the tree.
  • bvh::HierarchyRefitter: A parallel bottom-up BVH refitting algorithm, to use after changing the geometry inside the leaves of the BVH (for example, with animated models). This algorithm will simply update the bounding boxes of each node, and propagate the result up to the root. The topology of the BVH is left untouched during the operation. Useful when building another BVH is too expensive, or when the changes are small enough. Note that BVH quality may decrease as a result.

Traversal Algorithms

This library provides the following traversal algorithms:

  • bvh::SingleRayTraverser: A traversal algorithm optimized for single rays. Rays are classified by octant, to make the ray-box test more efficient. The traversal order is such that the closest node is taken first. The ray-box test does not use divisions, and uses FMA instructions when possible. The traversal can also be configured to operate in "robust" mode, in which the ray-node intersection does not use FMA instructions, and makes the necessary corrections to avoid false-misses (see Robust BVH Ray Traversal, by T. Ize).

Traversal algorithms can work in two modes: closest intersection, or any intersection (for shadow rays, usually around 20% faster). They only require an intersector to compute primitive-ray intersections.

Intersectors

Intersectors contained in the libary support linear collections of primitives (i.e. arrays/vectors), and allow permuting the primitive data in such a way that no indirection is done during traversal (the helper function bvh::shuffle_primitives reorders primitives for this exact purpose). Custom intersectors can be introduced when the primitive data is in another form.

Building

There is no need to build anything, since this library is header-only. To build the tests, type:

mkdir build
cd build
cmake ..
cmake --build .

Installing

In order to use this library in an existing project using CMake, you can clone, add as submodule, or even copy the source tree into some subdirectory of your project, say my-project/contrib/bvh. Then, instruct CMake to visit this directory and link against the bvh target:

add_subdirectory(contrib/bvh)
target_link_libraries(my-project PUBLIC bvh)

That's all that you need to do. Dependencies will be automatically added (e.g. OpenMP, if available).

Usage

For a basic example of how to use the API, see this simple example. If you need to library to read your primitive data from another source (if you want to avoid copying existing primitive data, for instance), take a look at this example. Finally, if triangles are not enough for you, refer to this file in order to understand how to implement your own primitive type so that it is compatible with the rest of the API.

License

This library is distributed under the MIT license.