name |
Here set the accessory Name to be displayed in Homebridge/HomeKit. |
host |
Here set the Hsostname or Address IP of Sat Receiver. |
port |
Here set the Port of Sat Receiver. |
auth |
If enabled, authorizatins credentials will be used for login. |
user |
Here set the authorization Username. |
pass |
Here set the authorization Password. |
volumeControl |
Here select volume control mode None/Disabled , Slider , Fan . |
infoButtonCommand |
Here select the function of I button in RC app. |
getInputsFromDevice |
This function get channels by Bouquet direct from device, manually configured channels will be skipped. |
bouquets.name |
Here set Bouquet Name which should be loaded from device, only first 90 services will be used. |
bouquets.displayType |
Here select display extra tile for all channels of this bouquet to be exposed in HomeKit app, possible None/Disabled , Outlet , Switch . |
inputs.name |
Here set Channel Name which should be exposed in the Homebridge/HomeKit |
inputs.reference |
Here set Channel Reference. All can be found in homebridge_directory/openwebifTv/inputs_xxxx . |
inputs.displayType |
Here select display extra tile for this channel to be exposed in HomeKit app, possible None/Disabled , Outlet , Switch . |
buttons.name |
Here set Button Name which You want expose to the Homebridge/HomeKit. |
buttons.mode |
Here select button mode, Live TV Channel or Remote Control . |
buttons.reference |
Here set Reference, only for Live TV Channel mode, in other case leave empty. |
buttons.command |
Here select Remote Control command which will be assigned to the button. |
buttons.displayType |
Here select display type in HomeKit app, possible None/Disabled , Outlet , Switch . |
sensorPower |
If enabled, then the Power will be exposed as a Motion Sensor to use with automations. |
sensorVolume |
If enabled, then the Volume will be exposed as a Motion Sensor to use with automations. |
sensorMute |
If enabled, then the Mute will be exposed as a Motion Sensor to use with automations. |
sensorChannel |
If enabled, then the Channel will be exposed as a Motion Sensor to use with automations. |
sensorInputs.name |
Here set own Name which You want expose to the Homebridge/HomeKit for this sensor. |
sensorInputs.reference |
Here set Reference like 1:0:1:3ABD:514:13E:820000:0:0:0: to be exposed as sensor (active on switch to this Input). |
sensorInputs.displayType |
Here select sensor type to be exposed in HomeKit app, possible None/Disabled , Motion Sensor , Occupancy Sensor , Contact Sensor . |
enableDebugMode |
If enabled, deep log will be present in homebridge console. |
disableLogInfo |
If enabled, disable log info, all values and state will not be displayed in Homebridge log console. |
disableLogDeviceInfo |
If enabled, add ability to disable log device info by every connections device to the network. |
disableLogConnectError |
If enabled, disable logging device connect error. |
enableMqtt |
If enabled, MQTT Broker will start automatically and publish all awailable PV installation data. |
refreshInterval |
Here set the data refresh interval. |
mqttHost |
Here set the IP Address or Hostname for MQTT Broker.) |
mqttPort |
Here set the Port for MQTT Broker, default 1883. |
mqttClientId |
Here optional set the Client Id of MQTT Broker. |
mqttPrefix |
Here set the Prefix for Topic or leave empty. |
mqttAuth |
If enabled, MQTT Broker will use authorization credentials. |
mqttUser |
Here set the MQTT Broker user. |
mqttPasswd |
Here set the MQTT Broker password. |
mqttDebug |
If enabled, deep log will be present in homebridge console for MQTT. |
Volume Control |
-1 - None/Disabled , 0 - Slider , 1 - Fan . |
Display Type Inputs/Buttons |
-1 - None/Disabled , 0 - Outlet , 1 - Switch . |
Display Type Sensors |
-1 - None/Disabled , 0 - Motion Sensor , 1 - Occupancy Sensor , 2 - Contact Sensor . |