gsaiz/doxa_server

Servidor pel nostre treball de recerca

doxa_server

In this repository, te code for the server made for our "Treball de recerca" is stored, if you are looking for the GUI or the simulations, those are stored in the following repos:

Android app: https://github.com/Feluk6174/doxa_gui

Simulations: https://github.com/Feluk6174/doxa_simulations

Instalation guide

The following installation is for Linux, concretly, ubuntu and arch based distros. The same or similar steps sould work with other OSs, but they might have to be adapted.

For the installation, the git pakage will be needed.

This project has been tested using python 3.10.7 and python 3.10.4.

First run the following commands:

    $ git clone https://github.com/Feluk6174/doxa_server.git
    $ cd doxa_server

Then install the libraries using the followuing command:

    $ pip install -r requirements.txt

installing the database

First, we have to install the database. We use mariadb, but a mysql database should also work, but this has not been tested.

To install mariadb on arch, run the following commands:

    $ sudo pacman -S mariadb
    $ sudo mariadb-install-db --user=mysql --basedir=/usr --datadir=/var/lib/mysql

To install it on ubuntu, run the follwing:

    $ sudo apt update
    $ sudo apt install mariadb-server

Run the following commands, to start the database, and make that the database starts after system reboot:

    $ sudo systemctl start mariadb.service
    $ sudo systemctl enable mariadb.service

To improve the seurity of the instalation, run the following command:

    $ sudo mysql_secure_installation

Select the configuations that you find adecuate.

Creating the user

Run the following command to enter the database:

    $ sudo mysql

Run the following command to create the database.

    MariaDB> CREATE DATABASE doxa;

Run the following command to create the user that will manage the database, replacing [password] with the password for the user.

    MariaDB> CREATE USER 'doxa'@'localhost' IDENTIFIED BY '[password]';

Run the following command to give acces to the user to the database.

    MariaDB> GRANT ALL PRIVILEGES ON doxa.* TO 'doxa'@'localhost';

Run the following command to make sure that new privileges are put to efect.

    MariaDB> FLUSH PRIVILEGES;

Now you can exit the database, using Ctrl+C or running the following command exit.

Next, modify the conf.json file, and change [password] for the password that you used while creating the database user.

Finaly finish setting up the database execute the setup_db.py script:

    $ python setup_db.py

Starting the program

Creating a service, will make that the program starts after system reboot.

To do this, modify the doxa.service, replacing [path] with the path to main.py (you can get the path runing pwd), and replacing [port] with the port where the program will run.

Then copy the doxa.service file to the /etc/systemd/system folder.

    $ sudo cp ./doxa.service /etc/systemd/system

Finally we can start the program.

    $ sudo systemctl start doxa

And enable it, this will make the program start after reboot

    $ sudo systemctl enable doxa