Be able to run OpenSBI firmware!
Closed this issue · 1 comments
gtxzsxxk commented
D:\code\temu\cmake-build-debug\temu fw_jump.bin -ram
OpenSBI v1.4
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Low-speed Linux Experimental Platform
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : ---
Platform Timer Device : --- @ 0Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : ---
Platform Shutdown Device : ---
Platform Suspend Device : ---
Platform CPPC Device : ---
Firmware Base : 0x2000000
Firmware Size : 178 KB
Firmware RW Offset : 0x20000
Firmware RW Size : 50 KB
Firmware Heap Offset : 0x24000
Firmware Heap Size : 34 KB (total), 2 KB (reserved), 9 KB (used), 22 KB (free)
Firmware Scratch Size : 4096 B (total), 164 B (used), 3932 B (free)
Runtime SBI Version : 2.0
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x12500000-0x12500fff M: (I,R,W) S/U: (R,W)
Domain0 Region01 : 0x02020000-0x0202ffff M: (R,W) S/U: ()
Domain0 Region02 : 0x02000000-0x0201ffff M: (R,X) S/U: ()
Domain0 Region03 : 0x00000000-0xffffffff M: () S/U: (R,W,X)
Domain0 Next Address : 0x02400000
Domain0 Next Arg1 : 0x00000000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Domain0 SysSuspend : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.12
Boot HART Base ISA : rv32ia
Boot HART ISA Extensions : smaia,smstateen,sscofpmf,sstc,zicntr,smcntrpmf,sdtrig
Boot HART PMP Count : 0
Boot HART PMP Granularity : 5 bits
Boot HART PMP Address Bits: 26
Boot HART MHPM Info : 0 (0x00000000)
Boot HART Debug Triggers : 1 triggers
Boot HART MIDELEG : 0x00002222
Boot HART MEDELEG : 0x0000b109
Process finished with exit code -1
gtxzsxxk commented
We made it! Next step is to fw_payload rather than simply fw_jump.