EBAZ4205_SDR

Apr 24th 2023: this repository is no more mantained because a new version exists at: https://github.com/guido57/EBAZ4205_SDR_spectrum

Description

This repository contains:

Vivado project
Vitis project
QT5 app

to display the 0-32 MHz radio spectrum in a full view and tune HF radio stations. This project is the continuation of https://github.com/guido57/EBAZ4205_Spectrum which is a 0-32 MHz radio spectrum viewer only.

Getting Started for FPGA or EBAZ4205 beginners

Before going straight to this project, I strongly reccomend to carefully prepare your HW / SW environment, following the instructions contained in:

In this project there's nothing esoteric, but it is quite complex because it requires:

Hardware assembling (you can use a solder iron on SMD, don't you?)
FPGA Zynq7010 design and programming with Xilinx Vivado
flashing Linux on the Zynq7010 FPGA with Xilinx Petalinux
building a C++ program running on Linux
building a Python program on Windows

Getting Started

HW is in my 30 MHz Spectrum and SDR in an FPGA Hackaday project
SW is here :)

Software

The following chapters describe the three main SW sub-projects (folders of this repository)

Zynq: the Xilinx Vivado project to program the Zynq7010 PL (Programmable Logic)
Vitis: the Xilinx Vitis project to build the TCP_server Linux app running on the Zynq7010 PS (Processing System)
sdr-app: the QT5 C++ software for PetaLinux to display the spectrum and tune the radio stations

Vivado (Zynq)

This is the Xilinx Vivado 2022.2 project that let's you to program the Zynq7010 FPGA (PL side) contained in the EBAZ4205 board.

After programming it, the EBAZ4205 will:

supply a 64 MHz clock to the AD9226 board
receive the 12 bits samples from the AD9226
receive commands from the Linux sdr-app running on the PS side of the zynq-7000 to:
- capture a frame of samples (2048 samples at a time)
- switch between the ADC input and a local RF test generator
- change the local RF test generator frequency in the range 100 KHz - 32 MHz
- tune a radio station
down convert and filter (CIC + FIR) the received signal
demodulate (AM only at the moment) and send it to an external loudspeaker
interface a PS/2 mouse
send HDMI to an external monitor

Vitis

This is the Xilinx Vitis 2022.2 project that let's you to build a C++ app, named colorbars, running on the Zynq7010 PS to configure the HDMI IPs (Video Timing Controller, Video DMA). This app has also a menu to choose the video format e.g. 1280x720 @ 50Hz and display colorbars for testing purposes.

sdr-app

This is the QT5 C++ software receiving sampled data from EBAZ4205 and displaying spectrum and waterfall in its User Interface. It lets you to send commands to EBA4205 also to:

switch between the ADC input and a local RF test generator
change the local RF test generator frequency in the range 100 KHz - 32 MHz
tune radio stations
change the waterfall colors (TODO)
Set IF bandwith and IF gain

guido57/EBAZ4205_SDR_HDMI_PS2