Livox SDK is the software development kit designed for all Livox products. It is developed based on C/C++ following Livox SDK Communication Protocol, and provides easy-to-use C style API. With Livox SDK, users can quickly connect to Livox products and receive point cloud data.
Livox SDK consists of Livox SDK communication protocol, Livox SDK core, Livox SDK API, Linux sample, and ROS demo.
- Ubuntu 14.04/Ubuntu 16.04/Ubuntu 18.04, both x86 and ARM (Nvidia TX2)
- Windows 7/10, Visual Studio 2015 Update3/2017
- C++11 compiler
Livox SDK communication protocol opens to all users. It is the communication protocol between user programs and Livox products. The protocol consists of control commands and data format. Please refer to the Livox SDK Communication Protocol for detailed information.
Livox SDK provides the implementation of control commands and point cloud data transmission, as well as the C/C++ API. The basic structure of Livox SDK core is shown as below:
User Datagram Protocol (UDP) is used for communication between Livox SDK and LiDAR sensors. Please refer to the Livox SDK Communication Protocol for further information. Point cloud data handler supports point cloud data transmission, while command handler receives and sends control commands. And the C/C++ API is based on command handler and point cloud data handler.
The Livox LiDAR sensors can be connected to host directly or through the Livox Hub. Livox SDK supports both connection methods. When LiDAR units are connected to host directly, the host will establish communication with each LiDAR unit individually. And if the LiDAR units connect to host through Hub, then the host only communicates with the Livox Hub while the Hub communicates with each LiDAR unit.
Livox SDK API provides a set of C style functions which can be conveniently integrated in C/C++ programs. Please refer to the Livox SDK API Reference for further information.
The installation procedures in Ubuntu 18.04/16.04/14.04 LTS and Windows 7/10 are shown here as examples. For Ubuntu 18.04/16.04/14.04 32-bit LTS and Mac, you can get it in Livox-SDK wiki.
Livox SDK requires CMake 3.0.0+ as dependencies. You can install these packages using apt:
sudo apt install cmake pkg-config
In the Livox SDK directory, run the following commands to compile the project:
git clone https://github.com/Livox-SDK/Livox-SDK.git
cd Livox-SDK
Install apr library by:
sudo ./third_party/apr/apr_build.sh
or by:
sudo apt install libapr1-dev
then
cd build && cmake ..
make
sudo make install
Livox SDK supports Visual Studio 2015 Update3/2017 and requires install CMake 3.0.0+ as dependencies.
In the Livox SDK directory, run the following commands to create the Visual Studio solution file. Generate the 32-bit project:
cd Livox-SDK
.\third_party\apr\apr_build.bat
cd build && \
cmake ..
Generate the 64-bit project:
cd Livox-SDK
.\third_party\apr\apr_build.bat amd64
cd build && \
cmake .. -G "Visual Studio 15 2017 Win64"
You can now compile the Livox SDK in Visual Studio.
The procedure of cross compile Livox-SDK in ARM-Linux are shown below.
Host machine requires install cmake and gcc. You can install these packages using apt:
sudo apt install cmake gcc
If your ARM board vendor provides a cross compile toolchain, you can skip the following step of installing the toolchain and use the vendor-supplied cross compile toolchain instead.
The following commands will install C and C++ cross compiler toolchains for 32bit and 64bit ARM board. You need to install the correct toolchain for your ARM board. For 64bit SoC ARM board, only install 64bit toolchain, and for 32bit SoC ARM board, only install 32bit toolchain.
Install ARM 32 bits cross compile toolchain：
sudo apt-get install gcc-arm-linux-gnueabi g++-arm-linux-gnueabi
Install ARM 64 bits cross compile toolchain：
sudo apt-get install gcc-aarch64-linux-gnu g++-aarch64-linux-gnu
For ARM 32 bits toolchain，In the Livox SDK directory，run the following commands to cross compile the project:
cd Livox-SDK
cd build && \
cmake .. -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_C_COMPILER=arm-linux-gnueabi-gcc -DCMAKE_CXX_COMPILER=arm-linux-gnueabi-g++
make
For ARM 64 bits toolchain，In the Livox SDK directory，run the following commands to cross compile the project:
cd Livox-SDK
cd build && \
cmake .. -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++
make
Note:
- gcc cross compiler need to support C ++11 standard
Two samples are provided in Sample/Lidar and Sample/Hub, which demonstrate how to configure Livox LiDAR units and receive the point cloud data when directly connecting Livox SDK to LiDAR units or by using a Livox Hub, respectively. The sequence diagram is shown as below:
For Ubuntun 18.04/16.04/14.04 LTS, run the lidar_sample if connect with the LiDAR unit(s):
cd sample/lidar && ./lidar_sample
or run the hub_sample if connect with the hub unit(s):
cd sample/hub && ./hub_sample
After compiling the Livox SDK as shown in section 4.1.2, you can find hub_sample.exe or lidar_sample.exe in the {Livox-SDK}\build\sample\hub\Debug or {Livox-SDK}\build\sample\lidar\Debug folder, respectively, which can be run directly.
Then you can see the information as below:
Samples we provided will connect all the broadcast device in you LAN in default.There are two ways to connect the specific units:
-
run sample with input options
-
edit the Broadcast Code list in source code
NOTE:
Each Livox LiDAR unit owns a unique Broadcast Code . The broadcast code consists of its serial number and an additional number (1,2, or 3). The serial number can be found on the body of the LiDAR unit (below the QR code).The Broadcast Code may be used when you want to connect to the specific LiDAR unit(s). The detailed format is shown as below:
We provide the following program options for connecting the specific units and saving log file:
[-c]:Register LiDAR units by Broadcast Code. Connect the registered units ONLY.
[-l]:Save the log file(In the executable file's directory).
[-h]:Show help.
Here is the example:
./lidar_sample -c "00000000000002&00000000000003&00000000000004" -l
./hub_sample -c "00000000000001" -l
Comment the following code section:
/** Connect all the broadcast device. */
int lidar_count = 0;
char broadcast_code_list[kMaxLidarCount][kBroadcastCodeSize];
Remove the comment of the following code section, set the BROADCAST_CODE_LIST_SIZE and replace the broadcast code lists in the main.c for both LiDAR sample ({Livox-SDK}/sample/lidar/main.c) and Hub sample ({Livox-SDK}/sample/hub/main.c) with the broadcast code of your devices before building.
/** Connect the broadcast device in list, please input the broadcast code and modify the BROADCAST_CODE_LIST_SIZE. */
/*#define BROADCAST_CODE_LIST_SIZE 3
int lidar_count = BROADCAST_CODE_LIST_SIZE;
char broadcast_code_list[kMaxLidarCount][kBroadcastCodeSize] = {
"000000000000002",
"000000000000003",
"000000000000004"
};*/
We provide the C++ sample to generate the lvx file for hub and LiDAR unit(s). You can use the same way in 4.2.1 and 4.2.2 to run them.
You can alse use the program options in 4.3.1 to connect specific device and generate the log file, and we provide two new options for lvx file:
[-t] Time to save point cloud to the lvx file.(unit: s)
[-p] Get the extrinsic parameter from standard extrinsic.xml file(The same as viewer) in the executable file's directory.(Especially for LiDAR unit(s) as the hub will calculate the extrinsic parameter by itself)
Here is the example:
./lidar_lvx_sample -c "00000000000002&00000000000003&00000000000004" -l -t 10 -p
./hub_lvx_sample -c "00000000000001" -l -t 10
You can get support from Livox with the following methods:
- Send email to dev@livoxtech.com with a clear description of your problem and your setup
- Github Issues